Two way speakers are one of the most common speakers in the market. These are also known as coaxial speakers. Two-way speakers are the best choice for those car owners who look for good sound quality with the lowest price. The two-way speakers usually combined with a woofer and a tweeter. A two-way speaker can handle both low and high-end sound frequency together. In a 2-way speaker, the amplifier transfers signal to the crossover. The crossover splits the signal into two parts. As a result, the speaker can produce both low end and high-frequency sound together.
Q. What does 3-way car speaker mean?
Three-way car speakers are somewhat similar to 2-way car speakers. It is also one of the most common types of speakers. The main difference between two-way speakers and three-way speakers is the presence of the power of producing the mid-range audio frequency. As a result, it can balance the sound accurately.
Q. Can I install my new car speakers myself ?
Well, the answer is yes. It’s not that complicated to install new car speakers. But the total process depends on what which type of speaker you are going to install. If you are going to install a 2-way type of speakers, then it’s a task of few minutes. It’s just replacing the old speaker and connection the wares. In case if you are installing any component speaker then it would take some time. But again it’s not a tough job for you.
Q. Can aftermarket speakers produce better sound than the factory speakers?
Yes for sure, if you are choosing the speaker in the right way because almost all the factory speakers are made of cheap material. Car manufacturers keep their focus locked on other features. They usually don’t want to spend a lot of money for the sound quality. Again it’s not guaranteed that all aftermarket speakers will produce better sound than the factory speakers. You need to research a lot to figure out which speakers will be the most suitable for your car audio system. If you are successful in doing so, then you will see a noticeable improvement in the sound quality. Worried? Don’t be. If you are not an expert or want to save time, then you better have a look in our best car speakers review.
Q. Why should I choose 6×9 speakers for my car?
There are so many options for you if you are to choose aftermarket car speakers. Each of those options comes with different features. It takes a lot of time to decide which type to chose or which product to choose for your car. Truly speaking it’s a bit complicated task to do so. People often choose 6×9 speakers it’s the best option for all of those who don’t want to get them into the mess while building the entire audio system. Because by far it’s an easy task to chose best 6×9 speakers for your car without spending a lot of money. The best thing about it is you are not sacrificing the stunning sound quality you have always dreamed
Q. Is it possible to install extra car speakers without replacing the factory speakers?
Yes certainly possible. To do that you have to find the proper position first and get to know the process how it works. If you don’t don’t find the perfect place for this, it might obstruct other critical components. The best position to do so is the door panel. You have to make sure you are using proper pieces of stuff in the right place and connect all wires correctly. One important thing is you should double check all the connectivity because an error in that can create a big problem for you.
Q. Is it needed to replace all the the releted equipments while changing the factory speaker?
In most of the cases the answer is yes. But most of the speaker manufacturers send important equipments with the new speaker. As the factory equipments get old, you better replace those if you get those with the new speakers. If you want to get stuck with your old stuffs then it’s not the end of the world. But it would be our recommendation to use whatever equipments you get with your new speaker.
Q. Is it necessary to have a Car Audio Amp?
Yes, it is necessary to have a Car Audio Amp for having better experience. A car amplifier helps you to get a louder sound which is a great thing. The quality of your car audio will increase to a noticeable stage if you have an Amp. There are many types of car Audio Amp in the market. The topper class you choose the better performances you get. Most important this is that it gives you a lot more flexibility such as adding extra features to your audio system.
Q. Should I try to reuse or recycle old car speakers?
Do they work? If they do, then you should better try to sell them because for someone it might be helpful. But what should you we do if those are not working anymore? Well, You don’t need to through them away because you can use it in many ways even if it’s not working anymore. You know, nothing is useless in this world if you know how to use it. In this case, you better rip it apart and try to use as many as it’s parts you can. We believe you won’t find the magnet useless as it’s a very useful thing. You can use the old speaker’s casing itself to recycle other stuff. You can also read How To Convert A Car Stereo Into A Home Stereo.
Q. What is the importance of cone materials in car speakers?
Cone is very important for car speakers. It is used in tweeters as well as in woofer. They come with a verity of quality. Most of them are made of synthetics and treated paper or composites. The function of it is to reproduce the bass. As you know bass is considered one of the most important things regarding the audio system, here comes the game of cone.
Q. What is the importance of Subwoofer in Car Audio System?
Having a Subwoofer in your Car Audio system is very very important specially if you are the one who likes to bang the road with your favourite music. If you install Subwoofer in your car that would improve your sound quality to significantly. It adds more frequencies to your audio system which makes it sound more realistic. If you don’t have any subwoofer installed in your car you need to know about How a Subwoofer Can Help Your Car Sound System to Sound Better.
Q. What is the main difference between Monophonic, Stereophonic?
Monophonic and Stereophonic as well as Surround sound systems are most common sound system. Please read our details guide on Monophonic, Stereophonic and Surround Sound for more detailed information.
Q. What is definition of Marine Speakers?
Basically, Marine speakers are similar to other vehicle speakers but they are mostly water resistant. They are more durable and and designed to work under different weather and conditions. They are mainly used in boats and ships.
Q. Is it possible to use Marine Speakers in car or any other vehicle?
Mostly the answer is yes. But it depends on the model your vehicle and the model of the speaker. To know more about the Differences between Car speakers and Marine speakers you can read our detailed discussion about these two popular types of speakers.
This ultimate Speakers faqs section will update regularly. If you have question about car speakers, fell free to ask in comment section, we will add your answer in next update.
As an Amazon affiliate, Speaker Champion earns from qualifying purchases.Everyone appreciates deep and high-quality bass while listening to music in their car. However, getting such kind of bass is not easy. You’ll need a powerful car music system to get the best bass. This includes adding a subwoofer. Under-seat subwoofers are some of the best car subs. They are simply installed under the seat such that they’ll be out of view and you’ll save your boot space. However, not all car subs are designed equal. But how would you know which is superior over the other? It’s simple. You simply compare the features, pros, and cons that come with each option. With such details, you’ll know the option suitable for your needs. With that said, here’s what you need to know about the best subwoofers that can be installed under the seat of your car, including a review of each subwoofer and a buying guide.
1. Rockford Fosgate P300-12 Punch – Overall Best Under Seat Subwoofer
We rank Rockford at the top based on its amazing and unique features. It has everything you would need in a car sub. It’s designed for powerful bass, all in a compact enclosure. Here’s why this sub made it to the top of our review.
Features and Benefits of Rockford Fosgate P300-12 Punch
It has an inbuilt class D amplifier- You’ll not have to spend more money buying an amp. You’ll simply hook the sub to your car stereo and get deep bass since the sub will amplify the sound with its own amp.
The subwoofer also comes with an inbuilt equalizer for the best sound balancing-You can easily adjust the gain level and bass boost for deeper bass. What more would you want when you have such tone controls in a subwoofer?
The enclosure of the sub is sealed-The tight sealing allows the sub to deliver tight bass. This way, you’ll get accurate bass.
It’s also worth noting that this sub comes with a crossover control- The low pass crossover control allows for adjustable filtering to control the bass level.
Moreover, the subwoofer has a remote control- You can adjust the tone from the comfort of your seat. You’ll not struggle to try to reach for any controls under the seat.
What We Like
Inbuilt phase switch
Detachable ground and power connector
Intelligent turn on or off function
Thermal and voltage protection
Remote control
Bass boost equalizer and low pass crossover
What We Do Not Like
The plywood panel housing the inputs is a bit thin
Verdict: If you want to forget about the challenges that come with a separate amp and sub, then Rockford Fosgate P300-12 Punch is made for you. Grab this all-in-one subwoofer right away.
2. Rockville RW10CA
Rockville RW10CA has not been left behind in the competition. It’s extremely slim, and this makes it quite unique among its competitors. Its slim design makes it fit even in the smallest under-seat spaces. Let’s look at other reasons why this subwoofer made it among the best subwoofers in our review.
Features and Benefits of Rockville RW10CA
This sub is compliant with CEA-2006- This compliance means that the ratings and specifications indicated on the product are approved by third parties. Thus, you’ll rest assured of investing in a product that will deliver the actual power stated on the product.
The sub is an all-in-one solution- It comes with an inbuilt amp for more power and bass. This reduces the amount of wiring needed, such that you’ll get a clean and easy installation.
Auto turn on and off- The sub comes with high-level inputs that eliminate the need to use a remote cable from the receiver for triggering the unit on or off. It simply senses the presence or absence of a signal to turn on or off automatically.
It features amazing controls-There is a responsive control for adjusting the volume to your liking. You can also use the phase control and bass boost according to your preference.
Won’t you love the subsonic filter in this sub? This filter filters out low frequencies that a human ear may not hear. The result is enhanced bass.
Inputs and outputs are housed on the same side- This makes wiring easier. It also ensures the wiring is neat since it all goes to one side.
Pros
Very affordable
Extremely slim and fits in most cars
Low pass filter
Sturdy enclosure
Comes with mounting hardware
Clean and solid bass
Cons
The bass is not deep enough to win a bass competition
Tends to overheat after some hours, so thermal protection will keep tripping
A bit of distortion at high volume
Verdict:Any car owner who has limited space but still wants to add some bass to their car music system should consider investing in the Rockville RW10CA subwoofer.
This Pioneer sub stands out for being shallow in-depth and has a small enclosure, yet it delivers deep bass. Thus, it will give you the hard-hitting bass you have been missing without taking much of your car space. Let’s look at its hits and misses and why it’s worth your consideration when shopping for a car sub.
Features and Benefits of Pioneer TS-SWX2502
Large cone structure- The large cone that comes with this speaker is shallow yet large. This allows it to offer deeper bass without taking much space. The design also allows for a small enclosure.
The cone is injected with molded resin-This cone construction technique creates a very rigid and long-lasting cone. The rigidness of the cone also allows for more accurate bass.
This sub comes with a dual spider- The benefit of the dual spider is offering more control over the movement of the cone. This allows for stable movement and a more accurate bass response.
The enclosure is one of a kind-Its exterior surface is carpeted. The surface is scratch-resistant and does not slip easily.
Its push terminals are angled- They make it extremely easy to connect the speaker cable. This type of terminal also saves on space.
Pros
Fits in most vehicles
Shallow speaker basket
Compact and innovative enclosure
Fully carpeted surface
Mounting screws and mounting brackets
Average price range
Powerful inbuilt amp
Cons
The cone does not have a protective grille
Some rattling at high volume
Misses out on some extreme lows
Verdict:If you’re trying to save on space, you’re on a tight budget, and still want some hard-hitting bass, then Pioneer TS-SWX2502 is made for you.
4. Kicker 11HS8
Kicker is known for manufacturing subwoofers with advanced technologies and uniqueness. The Kicker 11HS8 stands out for its ground-pounding and clear bass. It uses the latest bass technologies to deliver the best lows. Read on to find out more reasons why we featured this sub in our best under-seat subwoofer review.
Features and Benefits of Kicker 11HS8
Compact design- This subwoofer is almost unnoticeable. It looks like a sturdy briefcase, yet it’s a subwoofer with booming bass.
Great lows- The subwoofer is designed to deliver great low frequency despite being small in size. Thus, it assures you of great bass performance.
Powerful inbuilt amplifier- Kicker comes with an inbuilt 150 watts amplifier. With this amp, you’ll be assured of getting deeper bass without having to add a separate car amp.
Fastened nylon straps-This sub comes with an easy-to-connect plug for power. The nylon straps are fastened and allow for a tight installation and easy unplugging.
Remote controls-The sub has a remote control for bass and remote turning on. You can adjust the bass level and fine-tune it. You can also adjust the low pass filter.
This Cerwin-Vega subwoofer is designed for superior bass quality, with a capability of handling 200 watts RMS and a peak power of 450 watts. You get all this power in a compact design to save you space. Let’s see why this sub found its way into our review.
Features and Benefits of Cerwin-Vega Mobile VPAS10
Comes with a 10-inch woofer- The large 10-inch woofer ensures you get loud bass. The large woofer also delivers high-quality bass.
Adjustable input sensitivity-This technology is beneficial in that you can set the sensitivity of the input to your liking. You’ll have the freedom to control the kind of bass you get.
Compact design-The compartment is designed to fit even the smallest under-seat spaces. Thus, it can fit in most vehicles without struggling to create extra room for the sub.
Delayed turn-on feature– The remote turn-on feature that comes with this sub is soft and delayed. The benefit of this feature is preventing ear shock.
Thermal protection mechanism-It’s also worth noting that this sub comes with a circuit for thermal protection. The circuit is made of aluminum and assists in dissipating heat for consistent performance.
Pros
MOSFET power supply
Bass boost
Phase switch
Thermal protection
Adjustable low-pass filter
RCA inputs
Cons
Higher price range
Tends to cut out after some hours of use
A bit challenging to tune the sub
Verdict:The Cerwin-Vega Mobile VPAS10 is extremely sturdy, yet compact. While its price tag is on the upper side, always remember that quality matters most.
Buying Guide For Best under Seat Subwoofer
Now that you’ve gone through some of the best car subwoofers suitable for placement under the seat, how can you make the ultimate choice? Well, you only need to consider certain factors when making your choice. Without considering these factors, you may end up making a regrettable choice. However, with the right information, you can make the best choice possible. With that said, here are the factors you should consider when choosing an under-seat car subwoofer.
Size
Remember you’ll be installing the subwoofer under the seat of your car. The space below the seat is often minimal. Thus, you’ll want to go for a subwoofer that can fit in such a small space. This means choosing a compact subwoofer. It should fit well below the seat such that it does not protrude from the sides. It’s best when it fits all the way in without any side protruding outwards or without struggling to create more space to fit it in.
Ease of Installation
You’ll be working under a tight space when installing the speaker beneath the seat. Thus, the speaker you choose should be easy to install. The speaker and power inputs should be easily accessible, preferably on a side panel of the enclosure. This way, you’ll not struggle to hook up or unhook cables from your stereo to the sub.
Ease of Use and Control
The last thing you would want is struggling to reach out for some buttons below your seat. Thus, consider a sub that has remote control features. This will allow you to control different options without struggling to search for buttons. In case you must use the onboard controls, they should be well-positioned and easily reachable.Also, a sub that comes with auto turn on and off features would be an added advantage since it will sense the presence of a signal and turn on automatically or sense the absence of a signal and turn off automatically. This will make it more user-friendly.
Active or Passive
Some subwoofers require an external source of power while others don’t. Active subwoofers have their own power while passive options require an external power source. If you’re keen on saving space, faster installation, and less cabling, then an active sub would be the best deal. It comes with its own amplifier, thus you won’t need to invest in a separate amp and more complicated installation.
Power
Not all under-seat subs are designed equal. Some are more powerful than others. Here, the choice you’ll make should depend more on your preference. If you want deeper and hard-hitting bass, you’d rather consider a more powerful sub. However, if you only need standard bass, the power rating of the sub won’t be much of an issue.
Conclusion
Every car owner wants the best sound in their car. Most importantly, bass matters a lot to most car owners who love driving while listening to music. However, getting hard-hitting bass demands having the best subwoofer. There’re many types of subs suitable for cars. Under-seat subs are the best choice when saving on space. They have proven to offer deep bass, yet they take minimal space. They’re specially designed to fit in the tight area below the seat. Grab one today from the ones reviewed here to add booming bass in your car. Also, don’t forget to consider the aforementioned factors when making your choice.
Capacitors are electronic components that store electric energy and discharge it rapidly. Unlike batteries, they’re built to store and discharge energy rapidly. Every capacitor comprises of a dielectric and two electric conductors.
The dielectric acts as an insulator between the conductors. When a source of electric current powers the conductors, a field of static electricity is generated and stored around the dielectric. With that said, what’s the use of a capacitor in car audio?
Car audio capacitors are used to prevent dimming of dash lights and headlights when playing loud bass notes. They work by supplying the car amplifier with rapid jolts of power.
But how would you get to know the best capacitor for your car audio? It’s simple. Read on through this article for a review of the top 7 best car audio capacitors.
This buying guide will assist you in making a more informed decision upon knowing the features, pros and cons of the top 7 best capacitors for car audio.
We have interviewed many car owners who complain about dimming headlights and dash lights when blasting their music. They always wondered how they could fix this problem. Well, from our research, all they needed is installing a car audio capacitor. With a little investment, they installed car audio capacitors and are no longer experiencing the problem of dimming lights.
Also, we have done analysis from existing research on car audio capacitors to have deeper understanding about the features that a good capacitor must have. Most noteworthy, we have gathered reports from product experts to know more about the performance of different capacitors in the market. Results of our research shows that different car audio capacitors perform differently.
As a buyer, you need to know the best audio capacitor for your car. This is where this review comes in handy. It has everything you need to know as a buyer regarding the best car audio capacitors.
1. Planet Audio PC10F
Planet Audio PC10F boasts of being one of the best 10 Farad car audio capacitors. It’s unique in that it supports a capacitance value of 10 farads. This means that it can store and discharge more power than its main competitors. Hence, it can power more powerful car amplifiers than rival capacitors.
Features and Benefits of Planet Audio PC10F
Illuminated LED display: First of all, Planet Audio PC10F car audio capacitor comes with a digital, LED voltage display with three digits. The illuminated LED display makes it easy to know the current voltage of the capacitor, such that you can easily tell when it’s either full or running low.
Audible tones: Another key feature of this capacitor is that it has audible tone for overvoltage, low voltage and reverse polarity. The audible tones alert you whenever the capacitor experiences unfavorable conditions such as overvoltage, low voltage and reverse polarity.
High working voltage: Moreover, the capacitor features a working voltage of 16 VDC and a surge voltage of 24 VDC. Its support for higher voltage than standard ratings means that it’s protected from overvoltage and power surge.
Attractive finishing: In addition, the capacitor comes with an attractive black, chrome finish. The black, chrome finish makes it blend easily in almost any interior car finish, regardless of the color and style.
High capacitance: Finally but not least, the capacitor feature a capacitance value of 10 Farads.This means that this capacitor has higher power storage such that it can power amplifiers for longer periods than capacitors with lower capacitance.
Pros
Three digit LED display
Audible warning tones
High capacitance
Low voltage and voltage overload protection
Blue illumination
Cons
It’s price is in the high range
Lacks an inbuilt distribution block
Requires a little bit more time to charge
Our Verdict: Planet Audio PC10F capacitor is ideal for car owners who need to power more powerful car stereo systems. Although it’s a little more expensive than some of its competitors, it worth its price considering its higher capacitance.
2. BOSS Audio CPBK2-2
BOSS Audio CPBK2-2 is a 2 Farad audio capacitor. It’s unique for its compact size and weight, making it one of the smallest, yet a reliable capacitor in the market today. Its small size makes it less visible upon hooking up in your car stereo. Its compact design makes it easier to fit in even the smallest spaces.
Features and Benefits of BOSS Audio CPBK2-2
Three digit display- First and foremost, this capacitor comes with a red, three digit voltage display. The red display makes it easy to see the current voltage even while in the dark such that you can easily tell when it’s full or running low.
Warning tones- The capacitor also comes with the capability of audible warning tones. The audible tone alerts you in the event of reverse polarity, low voltage and overvoltage.
Remote terminal screws- It features remote terminal screws on the head. The head terminal screw makes it easy to hook up when charging or connecting it to your car stereo.
Fast charging- Since it’s a 2 Farad capacitor, it only takes seconds to charge. This means that you can charge it very quickly as needed.
Light weight and compact- It is compact in size with a low unit weight. This makes it fit easily in the smallest spaces and its lightweight nature makes it effortless to hookup.
Pros
Compact in dimensions
Light weight
It’s less expensive
Charges pretty quickly
Low voltage and overload protection
Cons
Stores less energy
May not power more powerful amplifiers
Does not feature an in-built distribution block
Our Verdict: BOSS Audio CPBK2-2is one of the best capacitors for car audio on the lower price tag. It’s most ideal for car owners with a tight budget and less powerful amps. It will surely offer you the convenience you need, thus consider it in your shortlist.
3. Sound Storm C22
The Sound Storm C22 capacitor is yet another great capacitor. Its key unique feature is its chrome plated posts. The chromium plating gives the posts a decorative surface finish. It also enhances the resilience of the posts. In addition, chromium plating makes the posts stronger and more durable.
Highlights and Benefits of Sound Storm C22
Surge protection- A high working voltage of 16V DC and surge voltage of up to 20V DC. Its high working voltage means that it can work efficiently under higher voltage and its surge voltage of 20V DC means that it’s protected from high voltage.
Quick to charge- The capacitor has a capacitance value of 2 Farads. The lower capacitance value makes it quick to charge such that it will power your car stereo amp within no time.
Digital display- It features a red voltage display that displays current voltage in three digits. The red voltage display enables a user to check the voltage of the capacitor without using any special voltage measuring tools.
Chrome plating- The Sound Storm C22 features chrome plated posts. The chromium plated posts have enhanced strength and durability, in addition to decorative finishing.
Mounting brackets- Mounting brackets and other mounting supplies are included. Thus, you will not have to invest any extra money with mounting supplies.
Pros
Budget friendly
Compact design
Surge protection
Gets a full charge quickly
Chrome plated posts
Cons
A little bit huge
Stores little charge
Not ideal for powering more powerful amplifiers
Our Verdict: If you really need a medium priced capacitor for your car stereo that charges pretty fast, then you can add Sound Storm C22 in your shortlist. It’s ideal for anyone with less powerful amplifiers.
4. Stinger SSCAP2M
The Stinger SSCAP2M is yet another great capacitor. Its main unique feature is its aluminum brushed casing. The brushed aluminum body is light, yet durable. Moreover, brushed aluminum is more attractive than standard aluminum. In addition, aluminum resists corrosion and is more resilient especially in colder environments.
Features and Benefits of Stinger SSCAP2M
Aluminum body- The Stinger SSCAP2M car audio capacitor features a brushed aluminum body. Like previously mentioned, its brushed aluminum body enhances its resilience, strength and durability.
Great display- This capacitor also features a three digit digital display. The voltage display enables a user to view the current capacitor charge and its red digits makes it more visible even at night.
Reverse polarity alerts- Another most noteworthy feature of this capacitor is its audible reverse polarity alerts. The alerts will notify you whenever there is reverse polarity due to improper wire connections.
Charges fast- The capacitor operates on a capacitance value of 2 Farads. Thus, it charges very quickly in readiness to power your car audio amp.
Satin terminal finishing- The Stinger SSCAP2M features satin finish terminals. Satin finish is beneficial in that it does not show any flaws on terminals and you will always miss to see any gouges on the terminals.
Pros
Very low ESR
Terminals with satin finishing
Alerts for reserve polarity
Very affordable
Fast charging
Cons
May not power systems exceeding 2000 watts
Lacks audible low voltage and overload alerts
Lacks surge protection
Our Verdict: In case you’re searching for one of the most inexpensive yet reliable capacitor for a car music system, then you need to check out Stinger SSCAP2M on Amazon. Consider it in your shortlist give your car amp more power.
5. Rockford RFC1
One of the most notable capacitors is the Rockford RFC1. It’s a 1 Farad capacitor with a unique feature of having a platinum plated body. Plating the capacitor body with platinum enhances its hardness. This makes it more durable and less prone to surface damage. For instance, it’s not easy to scratch a platinum plated capacitor.
Features and Benefits of Rockford RFC1
Platinum plated- As stated earlier, the Rockford RFC1 capacitor features a platinum plated body. This enhances its overall strength, making it more durable for it resists surface damage.
Solid brass top- Its top comprises of solid brass, which is known for its resistance to corrosion and tolerating high temperatures. The solid brass top assists in reducing stripping and also makes it possible for the capacitor to work efficiently despite any rise in temperature due to resistance while powering a car audio amplifier.
Low ESR- The capacitor has low equivalent series resistance. The low ESR means that it does not overheat easily regardless of the operational duration.
Rapid charging- Rockford RFC1 has a capacitance value of 1 Farads. The low capacitance value makes it possible to get a full charge quite rapidly.
Great color finishing- It features a silver primary color and a black secondary color. This make it blend well in almost any interior car finishing.
Pros
Low internal resistance
Platinum plated
Fast charging
Solid brass top
High voltage peak
Cons
Available on the higher price bracket
Doesn’t feature LED voltage display
Lacks audible alerts
Our Verdict: Rockford RFC1 capacitor is ideal for any car owner who needs a capacitor that can charge quite fast and one that can perform remarkably despite working under high temperatures. Although it’s a bit more expensive, remember quality matters.
6. Soundquest SQCAP2M – Budget Friendly
The Soundquest SQCAP2M is yet another affordable 2 Farads car capacitor. Its key feature is the brushed aluminum body. The finishing is highlyauthentic and decorative for a capacitor of its price range. Brushed aluminum capacitor body makes it weather resistant, thus it is ideal for use in a car environment.
Features and Benefits of Soundquest SQCAP2M
Brushed aluminum- Like already mentioned, this capacitor features a brushed aluminum body. It makes the capacitor more resistant to weather elements and also makes the capacitor look authentic and decorative.
Polarity warnings- The capacitor has reverse polarity warnings in form of audible alerts. The warnings alert the user about any reverse polarity such that the problem can be rectified immediately before it damages any components.
Satin terminals- In addition, the capacitor has satin finished terminals. Satin finishing makes the terminals resist moisture such that the capacitor can remain functional even in a humid car environment.
Voltage display- Moreover, the capacitor features a red, 3 digit display. The display shows the current voltage level of the resistor such that you can easily tell when it’s about to demand charging.
Surge protection- It has a surge capability of up to 20 volts DC. This means that this capacitor has surge protection of up to 20 volts DC.
Pros
Surge protection
Audible reverse polarity alerts
Extremely low ESR
Very affordable
Red three, digit voltage display
Cons
Lacks audible low voltage and overload alerts
Relatively heavy
A little bulky
Our Verdict: Considering its great features, the Soundquest SQCAP2M is a good option at its affordable price tag. Thus, it’s ideal for anyone with a tight budget, yet it offers all you need in a capacitor for your car stereo.
7. Power Acoustik PC1.5F
Power Acoustik PC1.5F boasts of being an average priced 1.5 Farads capacitor. It’s most noteworthy feature is automatic shutoff protection. This enables the capacitor to shut off the charging electric current whenever it’s fully charged. Automatic shutoff protects the capacitor from damage that may result from voltage overload.
Power Acoustik PC1.5F Key Highlights and Benefits
Standard range voltage- The capacitor operates within 12 and 16V DC. This makes it operable within the standard car DC voltage.
Clear display- Power Acoustik PC1.5F features a red, digital display. The display allows the user to view the current voltage charge in the capacitor without using an eternal meter.
Aluminum finishing- It comes with a brushed aluminum finishing. The finishing makes it look decorative while still making it resilient and corrosion resistant.
Translucent mounting brackets- The capacitor features translucent mounting brackets. They make it effortless to install the capacitor and their translucent nature makes them less visible once fitted.
Easy mounting- It features a single mounting post. The single mounting post makes it quite easy and fast to install the capacitor in your car amp.
Pros
Comes with mounting brackets
Digital, Led display
Easy to mount
Affordable
Automatic shutoff protection
Cons
No audible alerts
May not power more powerful amps
No in-built distribution block
Our Verdict: The capacitor is worth its middle price range, considering its great features. If your car amp does not demand a lot of power, this capacitor will be good enough and you’ll surely appreciate what it has to offer.
Things to Consider Before Buying the Best Car Audio Capacitor
Capacitors for car audio systems are not designed the same way. Different capacitors have different features. They have different pros and an equal share of cons. Thus, a capacitor that works for one car audio system may not work effectively in another car audio.
Therefore, you’ll want to choose the best capacitor for your car to get the most out of it. But how would you choose the best capacitor for your car audio? Well, there are some consideration you need to think about before making your final decision.
Here are the things to consider before buying the best capacitor for your car audio:
1. Capacitance Value Rating
The capacitance value rating of a capacitor describes the charge that a capacitor can store. Capacitance value is represented in Farads. The higher the capacitance value, the more powerful the capacitor.
Before buying a capacitor for your car audio, consider the power of your car amplifier. If your car amp is rated less than 2000 watts, a capacitor with a capacitance value of 1 to 2 Farads can suffice.
However, if you have a more powerful car amp, then consider a capacitor with a higher capacitance rating for the best performance.
2. Rated Voltage and Surge Voltage of the Capacitor
Different capacitors have different rated voltage. In general, most car batteries and alternators produce a voltage of 12 to 14.8V DC. Thus, you’ll want to consider a capacitor that can handle up to 16V DC rated voltage. The surge voltage should be on the higher side. A surge voltage rating of around 20V DC should suffice to ensure your capacitor does not get damaged in case of sudden voltage surge.
3. Voltage Overload and Low Voltage Protection
Each and every capacitor has a maximum voltage level it can take. Exceeding the maximum voltage may damage the capacitor. Also, low voltage can damage the capacitor. Thus, consider a capacitor with both voltage overload and low voltage protection to increase the chances of using it for more years to come. If you can get a capacitor with automatic shutoff, the better.
4. Ease of Charging and Installation
Another factor to consider is how easy it is to charge the capacitor. You wouldn’t want to invest in a capacitor that takes too long to charge or is complicated to charge.
Also, consider how easy it is to connect the capacitor to your car audio system. It should be effortless to connect or disconnect. Moreover, it should come with mounting hardware, including mounting brackets and screws.
5. Audible Alerts for Unfavorable Conditions
While driving, you might not always check your capacitor for charge level with the aim of driving safely. Thus, you should invest in a capacitor that can give you audible alerts for unfavorable conditions such as low voltage and overvoltage. Also, consider a capacitor with reverse polarity alerts.
6. LED Voltage Display
It’s ideal to invest in a capacitor that has a LED voltage display to easily know the current charge level of the capacitor. A LED voltage display eliminates the need to use voltmeters which only make it more challenging to use a capacitor in your car audio.
7. Durability of the Capacitor
Whenever investing in any product, you’ll always want something that can serve you for many years. The same case applies to buying capacitors. It’s ideal to consider the material and finishing of the capacitor. Choose a capacitor made of a material and finishing that can resist corrosion and weather elements. The end terminals should also be made of a strong material that resists abrasion.
8. Price-Quality Ratio
Well, it’s obvious that your budget determines the type of capacitor you can afford. Some capacitors cost more due to extra features while others are more affordable due to limited capacities. At the same time, it doesn’t mean that affordable capacitors don’t have great features.
However, you will not want to buy a capacitor just because it is cheap. You also need to consider its quality. Thus, you should consider balancing price and quality. Always avoid compromising quality of the capacitor over cost. Hence, consider a capacitor that has the features you need and is within your budget, else stretch your budget a little bit.
Final Verdict
In conclusion, the final decision you’ll make when buying the best capacitor for your car audio should mainly depend on the quality, features, and budget. Avoid choosing a capacitor for your car audio just because it looks attractive or it’s extremely affordable. Go for a capacitor that has all the features you want and is within your budget.
Although the capacitors mentioned in this guide have their similarities and differences, including different pros and cons, they have their unique features. Each of these capacitors has an outstanding feature that sets it apart from the other capacitors.
As long as you choose a capacitor that is powerful enough to power your car audio amplifier, you’ll be good to go. You’ll rest assured that your car’s headlights and dashboard lights will never dim whenever playing bass notes in your car audio system.
Hence, with these tips and guide in mind, you will stand better chances of investing in the best car audio capacitor.
I had installed a pair of aftermarket speakers in my vehicle quite some time ago, and they had finally given up, and were wore out. I had been very happy with my previous speakers so I was looking for something similar, or better but within a strict budget. A friend told me about the JBL GTO939 speakers that he had recently installed in his vehicle. He said that they were within my budget, but had the specifications of much higher priced speakers. He was very positive about them, and I wanted to find out more. I found out that they are very reasonable in terms of price, and perform as well as speakers two to three times their price point. They have so many positive reviews all across the board on every aspect and feature. I ordered them, and couldn’t wait to install them and try them for myself.
Who are these speakers designed for?
The JBL GTO939 speakers are designed with people in mind who:
Want great sound quality
Want easy installation
Have 6” x 9” speakers
Want to replace old and worn out speakers
Want an aftermarket speaker upgrade
Want a full range speaker
Has a budget, but still wants a great sound quality
JBL are an audio company known for producing good quality speakers. The JBL GTO939 are full range speakers that have been developed for crisp, clear sound. JBL GTO939 speakers are 3 way speakers, and have a few appealing features.
Installation
One of the biggest appeals of the JBL GTO939 speakers is how easy they are to install. While some speakers require specialist installation and modification to the vehicle, these do not. They were designed to replace stock OEM 6×9 speakers on almost any make and model of vehicle, and as an upgrade for any aftermarket speaker so you can install them yourself at home. You don’t need any special tools for installation, but if you’re trying to replace a smaller speaker with these, then you will need to modify the space to allow the speaker to fit.
Plus One Cone Technology
The JBL GTO939 speakers have JBL’s own Plus One cone technology. This is a cone that JBL have designed from specialist materials to be larger than average cones. A speaker produces sound by vibrating air, so the larger the cone, the more air it can vibrate. In these speakers, the Plus One cone helps it to produce better bass quality.
Wattage
The JBL GTO939 speakers have peak power handling of 300W per speaker, 600W for the pair. They have RMS power handling of 100W, 200W per pair. The wattage in these speakers mean that you can use them with your stock vehicle audio system and you will notice an improved sound quality. If you upgrade your vehicle audio system to run them through an amplifier then they really come into their own, and produce an incredible sound quality.
Sensitivity
The sensitivity rating is more important than most people realize. The sensitivity rating shows how the speaker will respond to power, so the higher the rating, the better the response. The power needed to deliver the same volume decreases by around half with each 3dB increase. The JBL GTO939 speakers have a sensitivity rating of 94dB. This means that if you have set your volume and you’re sing these speakers, you would use around 50 watts of power. In 91dB speakers you would need to use around 100 watts for the exact same volume level.
Tweeter
The tweeters in the JBL GTO939 is one of the speakers huge advantages over other speakers in the same price range. Actually, they’re one of the components of these speakers that allow them to compete with speakers in a higher price bracket. The one inch tweeters are made from a My/Ti, which is a Mylar and Titanium composite. They are designed to give more power handling, reduce distortion, and be more efficient. The distortion reduction is more evident in the mid range frequencies, which is where most tracks have the vocals. This allows the JBL GTO939 to give you a much crisper, clearer sound than other speakers.
UniPivot
The also have UniPivot. UniPivot is the system JBL designed that allows you to adjust the position of the tweeter so it is towards you. There is after installation customization as there’s also a control switch so you can adjust the tweeter dB output to your own preferences
These speakers have a minimum mounting depth of 2” which means that they are compatible with a very wide range of vehicles
They have a frequency response of 45 – 21,000 Hz
They produce a well balanced sound
They are a reasonably speaker, with the quality of a much higher priced speaker
These speakers have gone through a wide range of testing to ensure durability and high quality materials
What I Don’t Like
They have no hardware in the box, so may require some additional purchases
They work with the stock audio system, but most of their advantages are massively improved by upgrading your audio system
There is room for some improvement in the upper mid range, and deeper lows.
Frequently Asked Questions
Will these speakers fit in my vehicle?
The JBL GTO939 speakers are compatible with a huge range of vehicles. As a general rule, if your vehicle has 6” x 9” speakers, then these ones can replace them. They have a minimum mounting depth of 2” which is quite shallow, and can mean that they can be installed into almost any vehicle without any additional modification.
What comes in the box?
The box includes two 2 way 6 x 9 speakers, 2 bottom mount rings, 2 grilles and grille badges, eight machine screws, eight self tapping screws, eight split lock washers, eight flat washers, eight hex nuts, eight sped clips, warranty and instructions for installations. Everything you could need to install your speakers is in the box
Are they individual or a pair of speakers?
They are sold as a set of two speakers.
What comes in the box?
The box contains two JBL GTO939 3 way speakers.
Is there any hardware?
No, you will need to find the hardware and connectors yourself. Though this does mean that you can make sure that all the connectors are the right size for your vehicle.
The JBL GTO939 3 way speakers are capable of power, performance and quality. They are reasonably priced but with the specifications that you might expect from more expensive speakers. They are easy to install, but don’t come with any additional mounting hardware. This is easily solved by a trip to the hardware store, and it does mean that you can make sure that you have the proper sized connectors for your vehicle. Overall, they are a great speaker that give a much better sound quality than the factory speakers in your car can. Still if you are looking for other speakers you may read New Kicker DS693 Review.
I wasn’t particularly happy with the stock speakers that came in my car. The sound quality wasn’t great, and I wanted to overhaul the audio system completely. I was looking around for some good quality speakers, but I was on a budget and I didn’t want to overspend either. I came across these Alpine Spe-6090 speakers, and everything about them appealed to me. I read the reviews and everyone seemed to only have good things to say about them. I had heard of Alpine before, and I knew they had a good reputation for delivering high-quality products. These Alpine Spe-6090 speakers had a few features that I was really excited about, and they met all of my requirements perfectly.
Who are these speakers designed for?
These speakers are perfect for anyone who:
Wants to upgrade the factory speakers in their car
Want a better sound quality
Wants to replace speakers degraded due to age and use
Wants a full range speaker
Want to DIY install speaker
Wants good quality speakers at a reasonable price
Isn’t sure if they want to install an amplifier
Drives a car with 6×9 speakers
The Alpine Spe-6090 speakers are a reasonably priced Type-R speaker. They have some improvements over the previous ranges. They are a full range speaker, with great performance. Their design has been developed to enhance the sound quality and has taken the acoustics of the enclosed car space into account.
Wattage
The Alpine Spe-6090 coaxial speakers have peak power handling of 300W each and RMS power handling of 100W. As they come as a pair, this means that they have peak power handling of 600W and 200W of RMS power handling. The wattage means that even when the speakers are used in conjunction with the factory audio player in the car, they still produce a very high sound quality. They handle a lot of power, but they’re also very efficient, and can be used with an amplifier, so that you can get even better quality than ever before.
H.A.M.R
These Alpine Spe-6090 speakers have HAMR Surround or High Amplitude Multi Roll Surround. This is a patent pending technology developed by Alpine for many of their subwoofers. In some speakers when you have your volume at a higher level the suspension system becomes unstable, loses control and distorts the sound. This doesn’t happen with the HAMR Surround. It combines a larger cone area with long line excursions, to produce a perfect, deep bass response.
Easy Installation
Full range speakers are typically easier to install than component speakers. They usually can be installed yourself without any difficulty, or the use of long complicated instructions. The Alpine Spe-6090 speakers are even easier to install than other full range speakers. They are constructed from an HD polymer frame, which offers many advantages over traditional steel frames regarding its installation. It’s a revolutionary construct which means that the speakers are lighter, sturdier and stronger than any traditional speaker.
Compatibility
The Alpine Spe-6090 uses a smaller Neodymium Magnet than other traditionally made speakers. This means that the whole speaker is more compact than other speakers. This compactness allows for better performance, more control, higher quality, lighter weight and more compatibility with a much wider range of makes and models of vehicle. They are generally compatible with any vehicle that already has a 6×9 speaker, but you may want to make sure that your particular vehicle make and model is compatible.
Type R speakers
Alpine are one of the giants in aftermarket car audio system speakers. They have consistently offered high quality, great design and superior technology in all of their speakers, but the Alpine Spe-6090 speakers are type R, which is one of the more recent series lines of the speaker. The type R has taken all of Alpine’s advances in terms of the sound quality produced and taken it to the next level. Alpine’s Type-R speakers combine patent pending technology, with an incredible design, to create one of the most popular, highest-performing full range speakers available, while still maintaining a reasonable and affordable price point.
What I Like
They are compatible with the built-in vehicle stereo system
These speakers are compatible with an amplifier
They have 60Hz – 29kHz Frequency
They are capable of sound of 90dB
These speakers have a 1” ring radiator tweeter to give high-frequency quality
Every component in these speakers are constructed from high-quality materials
They have a shallow design, which means that there should be no need to modify the vehicle for installation
What I Don’t Like
Will not produce good quality audio if not installed properly
Might not have the bass quality of a component speaker
Works better with an amplifier
Can overpower the other speakers, if they haven’t been upgraded as well
Frequently Asked Questions
What are the measurements of the speaker?
The dimensions of the Alpine Spe-6090 speakers are 8.7 x 3.5 x 7.1. They weigh around 7 pounds.
What comes in the box?
The box includes two 2 way 6 x 9 speakers, 2 bottom mount rings, 2 grilles and grille badges, eight machine screws, eight self tapping screws, eight split lock washers, eight flat washers, eight hex nuts, eight sped clips, warranty and instructions for installations. Everything you could need to install your speakers is in the box
Do they need an amplifier?
These speakers don’t need an amplifier to work, but they do have more potential and offer a higher sound quality if they are run through an amplifier. But they do still give impressive improvements over the stock speaker when run through the audio system.
Are they priced per pair, or per speaker?
These speakers are priced per pair, and not individually.
Do they come with a warranty?
Yes, they have a one year warrant.
Will they fit my car?
As a general rule, if your car has 6” x 9” speakers, then these Alpine Spe-6090 speakers are probably compatible with it.
Verdict
The Alpine Spe-6090 are powerful, efficient, and give a great sound quality. They are incredibly priced and the price is per pair. They are a full range speaker, that are very easy to install. They can be installed at home, so there’s no need to pay an installation fee at a shop. They have some of the most recent and advanced audio technology. They’re compatible with a wide range of makes and models. I bought these to replace the stock speakers, and I really wasn’t disappointed. They did everything they said they would at the fraction of the price of many other speakers. I would happily recommend them to anyone. If you are still looking for something else please read JBL GTO939 Review.
Music is a massive part of most people’s lives. It is a way to express yourself and has been linked to many health benefits, including improved mood and decreased depression. In addition, because of the rise of modern technology, there has never been more ways to listen to it – such as on personal music players, via the computer and Bluetooth devices, and in the car. When listening in the latter, it is possible to have equipment that will really get the best out of your music so that you can enjoy it to the highest level of quality. Below we are going to look at a set of speakers you can fit into your existing vehicle to really boost those tunes.
Why should I be interested?
The Kenwood KFC-6965S 6″ x 9″ 3-Way Flush Mount Speakers come from speaker aficionados Kenwood, a company that has been in operation since 1947. You know that you can buy with confidence, as unlike many other companies Kenwood have been in the speaker game for a long time. Kenwood’s KFC-6965S speakers take advantage of the company’s technical knowledge and advanced material usage to give your music that sumptuous high-quality, rich sound it deserves.
What is the sound output and what are the special features?
Designed for those who want to get really powerful bass and high-quality treble from their in-car entertainment, the KFC-6965S has a fantastic 600 watts of maximum power output, which equates to a punchy 89 dB/w at the 1m sensitivity range. In addition, there is a frequency range response all the way from 60Hz up to 2500, so you know that all levels of your music are going to be outputted at the highest level.
What is the design?
Made to fit in place of your existing 6” x 9” speakers, the Kenwoods are flush mounting speakers with a 3-way design that contains a brand new polypropylene hybrid cone with a rubber butyl surround (which lowers the change of wearing and keeps the music playing no matter what the conditions), a diamond array pattern (which means that you get more dynamic response with a far lower level of distortion), along with a ferrite magnet. Coming in a sleek and sexy black colour, the Kenwood speakers also have a silver finish around the treble output, to really enhance the look, as well as a hard black steel basket surround that really looks the part (and prevents the speaker from getting unnecessary damage.
It is important to note that as the Kenwood speakers are designed to specifically fit in a surrounding encasing, that you need to ensure that the space in your vehicle is the same size, to avoid them not fitting correctly. It is best to go to a vehicle shop that can remove your old ones and check the specifications there. If the speakers came as factory standard with your car then you can check your owner’s manual for more details on the size and shape of fitting.
What are the size specifications?
The speakers themselves are 153mm by 229mm, with the Mid-Range section being 1 inch (25mm) with a soft Dome Diaphragm to really push out the sound, as well as a 3/4 inch (19mm) P.E.I Balanced Dome Design.
Below is a full list of everything that you will find when you open the box for the The Kenwood KFC-6965S 6″ x 9″ speakers:
The speakers themselves
2 Grilles
2 Grille frames
Two 11″ lengths of speaker wire.
8 x 1-1/2″ Self-tapping screws
8 x M4x70mm machine screws
8 Large flat washers
8 Small flat washers
8 Split lock washers
8 xM4 Hex nuts
2 x 4″ Strips of speaker grille putty
Warranty information
Template and specifications on box for fitting etc.
What are other people saying about the speakers?
Unsurprisingly the Kenwood KFC-6965S speakers have proven themselves to be quite popular among the general public.
Some of the positive review highlights include:
Fantastic packaging that kept the speakers protected whilst still sealed and helps to prevent any damage before opening.
A fantastic level of sound output with high-quality production at all frequencies, even when pushed to their uppermost limits.
Quite easy to fit yourself with even only a basic level of DIY skills at your disposal. Instructions quite clear for how to fit to give that added piece of mind.
Some of the more negative reviews (of which there aren’t very many) did highlight a few potential concerns:
Kenwood only provide double-sided sticky tape to hold the speakers in place, and some reviewers were concerned that with constant use and extensive vibration (especially if played at louder levels) this could eventually peel off, causing the speakers to fall out. No one had mentioned this actually happening, however so it seems that it is more something to look out for in the future. In addition, adding extra tape yourself could be another way to help combat this potential issue.
The fitting of the speaker frame grill is somewhat cumbersome according to some, due to you needing to cut putty into shape yourself and fit it around the rim of the speaker, before putting the grill in place. This was highlighted a couple of times, yet all eventually managed it, so it doesn’t appear to be too much of an overall issue.
What can we conclude?
It seems that The KFC-6965S 6″ x 9″ 3-Way Flush Mount Speakers are a fantastic high-quality set of speakers for the front of your car, that will give you a great return for your relatively small investment. You can buy with the confidence that you always get buying a Kenwood music product, and install them with relative ease, although there might be some minor niggles with setting the cage in place. If you are looking for some good quality music output on the go, then you can’t really go wrong with the Kenwood KFC-6965S. Reading Rockford R169X2 Review can also help you choosing your desired one.
Are you on the lookout for the best 6×9 car speakers? You need to look no more than the Polk Audio’s DB691. Boost your vehicle’s audio performance with these versatile and efficient speakers from a revolutionary manufacturer. Polk Audio are known for their cutting-edge speaker designing with modern technologies. All Polk speakers are designed with the best materials that enables them to produce a perfect music quality that you’ve never heard before. The company use the most advanced manufacturing techniques such as laser imaging that enables them to determine the most appropriate designs and materials best suited for modern speaker.
DB691 is a pair of 6×9-inch 3-way component coaxial speakers that provides an awesome sound performance. Three-way speakers are so far the best for those who prefers loud music. Although 2-way speakers are loud too, they don’t give the higher frequencies like those produced by likes of DB691 three-way audio speakers.
Product Specifications
6″ x 9″ 3-way Speakers
Frequency Response: 35-22,000 Hz
Peak: 600 watts per pair / 300 watts each
RMS: 200 watts per pair / 100 watts each
Maximum input power: 125 Watts RMS
Impedance: 4 Ohms
Sensitivity- 93 dB efficiency
Who are these speakers designed for?
Car Owners
Boat riders
Motorcycle riders
Gamers
Outdoor Entertainers
Features of the Polk Audio DB691
Dome Super–tweeter and Mica Cone Woofer
The built-in 2-way speakers balances the low and high frequencies for perfect flow of frequencies to the proper drivers, hence efficient audio. A perfect balance of equipment like the Mica cone woofer and silk polymer dome tweeter allows for a smooth response to any volume level.
The speaker produces quality sound, thanks to the silk dome tweeters that produces very clear sound. Even if you increase the system volume, the tweeters maintains a pleasantly rich sound that is warm to your eyes even. It features Neodymium tweeter magnet with 1-inch liquid cooler polymer composite dome. There is a plentiful bass as well as mid-range. The three and a quarter-inch super tweeters enhances the sparkle for producing natural music intricacies
Mica Composite Woofer with Durable Butyl Rubber Surround
The speakers come equipped with polymer composite cone adopting a rubber surrounding. The durable butyl rubber is capable of standing all the stress of extreme temperatures like harsh sunlight. The dynamic mica/polymer composite is perfectly stiff though lightweight to allow for bigger sound and less distortion. The rubber surrounding boost the speaker’s bass response and also increases the speaker’s lifetime under any conditions. Enjoy intense sonic harmony for longer hours with Polk Audio DB691 speakers. The overall tonal balance is perfect with the perfect presentation of the lows, mid and highs
Stainless Steel Mounting Hardware
Polk Audio DB691 speakers features stainless steel mounting and rustproof baskets, making them suitable for marine use. Being marine certified, offers a great deal of versatility and the therefore can be used for multiple applications. The stainless steel design allows them to be used in both outdoor and indoor environments without getting rust. One feature that you’ll probably want to hear about any sound product is waterproof. Yes, Pol Audio DB169 are water proof and you need not worry if they are rained on or splashed on by water. However, you should not submerge them into water as this will result into technical damage.
ABS Grilles
Acrylonitrile Butadiene Styrene (ABS) is a kind of thermoplastic polymer that is best suited for marine and other industrial applications. The muscular ABS grilles adds a stylish design for those who want to customize their car audio system. The sound system you install for your motor determines the interior decoration. ABS grilles are known for its unmatched beauty and that’s why Polk audio engineer stooped for nothing less than this designing. The aesthetic decoration of this speakers complements the quality sound they produce, which is far much better compared to the sound produced by metal tweeters made from titanium or aluminum
Are you on the lookout for the best 6×9 car speakers? You need to look no more than the Polk Audio’s DB691. Boost your vehicle’s audio performance with these versatile and efficient speakers from a revolutionary manufacturer. Polk Audio are known for their cutting-edge speaker designing with modern technologies. All Polk speakers are designed with the best materials that enables them to produce a perfect music quality that you’ve never heard before. The company use the most advanced manufacturing techniques such as laser imaging that enables them to determine the most appropriate designs and materials best suited for modern speaker.
DB691 is a pair of 6×9-inch 3-way component coaxial speakers that provides an awesome sound performance. Three-way speakers are so far the best for those who prefers loud music. Although 2-way speakers are loud too, they don’t give the higher frequencies like those produced by likes of DB691 three-way audio speakers.
Product Specifications
6″ x 9″ 3-way Speakers
Frequency Response: 35-22,000 Hz
Peak: 600 watts per pair / 300 watts each
RMS: 200 watts per pair / 100 watts each
Maximum input power: 125 Watts RMS
Impedance: 4 Ohms
Sensitivity- 93 dB efficiency
Who are these speakers designed for?
Car Owners
Boat riders
Motorcycle riders
Gamers
Outdoor Entertainers
Features of the Polk Audio DB691
Dome Super–tweeter and Mica Cone Woofer
The built-in 2-way speakers balances the low and high frequencies for perfect flow of frequencies to the proper drivers, hence efficient audio. A perfect balance of equipment like the Mica cone woofer and silk polymer dome tweeter allows for a smooth response to any volume level.
The speaker produces quality sound, thanks to the silk dome tweeters that produces very clear sound. Even if you increase the system volume, the tweeters maintains a pleasantly rich sound that is warm to your eyes even. It features Neodymium tweeter magnet with 1-inch liquid cooler polymer composite dome. There is a plentiful bass as well as mid-range. The three and a quarter-inch super tweeters enhances the sparkle for producing natural music intricacies
Mica Composite Woofer with Durable Butyl Rubber Surround
The speakers come equipped with polymer composite cone adopting a rubber surrounding. The durable butyl rubber is capable of standing all the stress of extreme temperatures like harsh sunlight. The dynamic mica/polymer composite is perfectly stiff though lightweight to allow for bigger sound and less distortion. The rubber surrounding boost the speaker’s bass response and also increases the speaker’s lifetime under any conditions. Enjoy intense sonic harmony for longer hours with Polk Audio DB691 speakers. The overall tonal balance is perfect with the perfect presentation of the lows, mid and highs
Stainless Steel Mounting Hardware
Polk Audio DB691 speakers features stainless steel mounting and rustproof baskets, making them suitable for marine use. Being marine certified, offers a great deal of versatility and the therefore can be used for multiple applications. The stainless steel design allows them to be used in both outdoor and indoor environments without getting rust. One feature that you’ll probably want to hear about any sound product is waterproof. Yes, Pol Audio DB169 are water proof and you need not worry if they are rained on or splashed on by water. However, you should not submerge them into water as this will result into technical damage.
ABS Grilles
Acrylonitrile Butadiene Styrene (ABS) is a kind of thermoplastic polymer that is best suited for marine and other industrial applications. The muscular ABS grilles adds a stylish design for those who want to customize their car audio system. The sound system you install for your motor determines the interior decoration. ABS grilles are known for its unmatched beauty and that’s why Polk audio engineer stooped for nothing less than this designing. The aesthetic decoration of this speakers complements the quality sound they produce, which is far much better compared to the sound produced by metal tweeters made from titanium or aluminum
Multi-hole Speaker Mounting Pattern
This feature allows for easy installation of speakers in most cars and even motorcycles. Multi-hole mounting pattern allows you to come up with multiple ways on how you can mount and install the Polk Audio DB169 speakers on your car, boat, motorcycle. Use the speaker, for right, left or center channel applications and discover the full-spectrum performance featuring a professional impact. The speakers are designed for car sound system installation though they can be used for multiple applications. Install the speakers in a sealed box for the best opportunity for bass production.
ABS grille adds an aesthetic design to your car’s interior
Durable design featuring butyl rubber surround and stainless steel mounting
Multiple hole speaker mounting for easy installation
Cons
The speakers lack slightly in the base department
Frequently Asked Questions
Are the speakers marine certified?
Yes, the Polk’s DB691 meets marine certification standards. They are marine certified and offers a great deal of versatility. The stainless steel design gives them the ability to be used in a wide range of applications. You can install them to your boat sound system.
Are they sold in pair or priced individually?
DB691 Polk speakers are sold in pairs but priced individually.
Can they get wet?
These speakers are waterproof. However, submerging them in water can cause technical damage. Speakers features multiple wiring components that are not-moisture friendly. The rubber designing o these speakers makes them only waterproof to slight amount of water.
Overall, the DB691 three-way speakers system are perfect versatile sound system accessories. The high performance coaxial loudspeaker comes with the latest Polk technology, making them a great choice for any car. If you’re looking for ultimate speakers to revitalize your music, then all you need are these great car sound speakers. Upgrade your car’s sound system today with DB691 6×9 speakers. It doesn’t only offer clear sound but also provides better flexibility when it comes to wiring your sound system.
There are endless choices when it comes to car speakers. It is wise to compare different products before making your final decision. There are various factors to examine when searching for speakers to install in your newly acquired car. Some of the things to look for in car speakers include configuration, size, quality of sound and price among others.
Rockford Fosgate Punch P1694 is among the best speakers on the market. The speakers boast of a sleek design, small size and affordable price. The flat black design is another aspect that has made this product more popular. Each of the speakers comes with four drivers and offers a frequency range of 60Hz-24 kHz. To find out more about these speakers, read on.
Whom is this product designed for?
Music lovers
Private car owners
Public service vehicle operators
Features of the Rockford Fosgate Punch P1694
FlexFit Basket Design
When looking for speakers for your car you need to find those that will fit perfectly. The flex fit basket of these speakers makes them to fit into your car. This makes it easy to adjust your speakers upon mounting them. The concealed crossover of the speakers has been made such that it allows for easy transfer of frequency to the right components of the speaker while at the same time maintaining the compact design of the unit. Anyone who has been looking for speakers with compact look and fit in their cars properly can bank on these speakers. The basket design is probably among the reasons that have made these speakers one of a kind.
Butyl Rubber Surround
The speaker delivers high sound quality, thanks to the Butyl rubber surround. In addition, the rubber surround makes the speaker durable. This means that you will not dig into your pocket a few weeks down the line in order to buy new speakers. In simple terms, these speakers will last for years. You should also know that the quality of sound produced by the speakers does not deteriorate with time like other low-quality products you are likely to find at the local market.
Tweeter Mounting
Most buyers tend to ask themselves how they are going to mount their speakers in their car. Mounting these speakers in your car is not something to give you sleepless nights. The tweet mounting aspect of these speakers offers concentric clamping pressure around their mounting region. This implies that mounting the speakers in your car is going to be as easy as taking an evening walk at the park with your spouse or friends over the weekend.
Sensitivity and Power Handling Systems
The Rockford punch speakers are a true definition of the major qualities that buyers look for when buying car speakers. The sensitivity and power handling systems of the speakers sets them above other cheap products that you will be tempted to go for when in need. The system boasts of premium drop speaker that is seen in some of the top units you can find at the local market. It does not make sense to break into the nearest bank in order to get cash to buy expensive car speakers when these are being sold at an affordable price. To add a punch in your recently acquired car, simply grab these speakers and you will see the difference at the end of the day
Peak Power Handling
Rockford punch speakers will not disappoint you as far as power handling is concerned. The manufacturer has designed them such that they can support up 150 watts. This power handling capability makes them better than other products. Individuals who want to enjoy quality music from the comfort of their cars can bet on these speakers to deliver the same. At 150 Watts, these speakers definitely belong to some of the leading products for both average and high-income earners. You can compare them with other products at the local or online stores to understand what it means to buy speakers with such as power handling capability.
Dimensions
Dimensionally, the speakers are 6 x9 inches. This means that they will fit into your car with ease. You do not need to bother about where to place the speakers once you have acquired them from the online store or local market. It is wise to go for speakers that come with a warranty.
One Year Warranty
The Rockford speakers are sold with a one year warranty. This implies that you will have the peace of mind you need when using the speakers because you have assurance that they will serve you for several years before you think about buying others.
Pros
They boast of Superior sound quality
They provide consistent listening
The speakers are Easy to install for both experience and first-time users
They offer impressive frequency range
They are a perfect option if you have limited space in your car
The speakers are sold at Affordable pricing
Rockford speakers are highly functional and concealed crossover function
Cons
They have narrow frequency response band
They do not have impressive power handling
They not very attractive
Frequently Asked Questions
Do the speakers produce quality sound?
The sound quality of these speakers is great. In fact, the speakers are second to none in terms of sound quality. To enjoy high quality sound, ensure that you are using both speakers.
What is the role of OEM adapter plate feature?
A great percentage of new models of speakers feature an adapter where you mount the speaker on and then the adapter is mounted on the door of the vehicle. This feature allows you to mount your speakers directly to the door of your car without going through much hassle over the same.
Verdict
In conclusion, Rockford speakers are simply the best. These speakers offer high quality sound. In addition, they are easy to install for both novices and experienced persons. Unlike other speakers that take much space, this product is small in size. The basket design makes it easy to fit them in your car after buying them. The sound quality, price, durability and design make these speakers worth your money. To purchase this product at an affordable price, you can check with online stores for better deals. If you have any question regarding automotive audio systems please read our Ultimate Car Speakers FAQs.
Some time back, late last year, I saw a video on YouTube of Trey Songz on his visit to Kenya to participate in Coke Studio. This is a show sponsored by the Coca-Cola Company aimed at enhancing local musical talent in Africa. So on his way to the studio, he was carried by a “matatu” a kind of van in Kenya which is very famous for its exquisite graffiti art and loud music. This story really caught my eyes as I was traveling to the same country after two days and was excited to try and work out this local and most seemingly thrilling means of transport. So on reaching Kenya, I took a cab to the central business district and got a matatu which was headed the route as I was with some assistance from a friend. That matatu had the Pioneer TS-A6996S speakers and it was just awesome. I could tell because my colleague at work recently goes the same for his car.
Pioneer Electronics is renowned worldwide in creating a high-quality state of the art music equipment. The TS-A6996S is one of their many engineering masterpieces as far as sound quality output is concerned.
The Pioneer TS-A6996S audio speakers are made to target a vast array of end consumers such as:
Owners of personal vehicles
Public transport means such as the matatus of Kenya
Cabs
Aircraft
Sea vessels
Features of the Pioneer TS-A6996S
The Pioneer TS-A6996S audio speakers come in a pair, both speakers are set to please you with it’s amazing sound . These speakers has 650-watt which helps to produce louder sound. Combined these two produce a crisp clear and precise sound output although I would have preferred if the smaller speaker has more bass. The two speakers, when combined, do not also give quite a responsive stereo surround output as they should. Pioneer electronics should offer this product in two pairs if all they want positive feedback from the end consumer.
Size
The compact size of the two speakers is one of their most striking features. This allows them to be easily installed in all the above mentioned manned vehicles and not occupy a lot of space. The fact that they are normally small has not rendered them weak in terms of power output. As compared to other high-end brands, Pioneer Electronics has still managed to create an audible and well-developed product.
I still believe that the manufacturers of this product have the technological know how to increase the power output of these particular speakers and even reduce their size. Who knows, maybe after this is implemented the target market might grow. After all, who wouldn’t want more space in their car? As far as this is concern.
Design
The Pioneer TS-A6996S audio speakers are designed to be sleek yet tough, small yet powerful, sophisticated yet easy to install. Their distinctive black color and almost oval design give them an edgy look which is both admirable and appealing to the eye. I, however, think that Pioneer Electronics can make it a bit more stylish and make consideration for the female gender bearing in mind that a substantial number of women all over the world are becoming car owners.
Pioneer electronics should therefore acknowledge this development and carry out market research pertaining what women want to have in their automobiles as far as sound is concerned.
The Price
Considering the high-end reputation of the manufacturing company, the price of the speakers might be considered as many to be fair. I mean who wouldn’t buy Pioneer dual speakers for reasonable price. The problem is not the company, though. Pioneer Electronics has to understand that its competitors are quickly coming up with products of the same quality and selling them at a much lower price.
While Pioneer is also selling its famous brand name, these other competitors are out to look for customers who think that Pioneer products aren’t worth their prices and in turn, these companies are in a continuous state of growth. The Pioneer TS-A6996S audio speakers are worth their price but many people, especially in third world countries, would not buy them while other products from different brands have the same quality of sound output and hardware but go for lower prices.
Backing of pioneer customer support and years of experience
They are compatible with most audio system allow for easy low-cost installation
They do not interfere with another gadget
Low impendence and high output for a speaker in its category
Cons
The system requires a cabinet for optimal performance
Getting the best speaker cabinet for optimal output may prove challenging
One need to contact cabinet builders to prepare suitable cabinets for use with the system
One will have to buy them separately resulting in additional costs
Frequently Asked Questions
Do I need to install an amplifier on my current system to use these speakers?
It will depend on the output of your music system. Most modern systems have a high output and can work well with the Pioneer TS-A6995R. If one is looking for more punch and umps, it is best to have amplifiers. An amplifier will help push the speakers to their limit but be carefully not to exceed their output limit.
Do I need to additionally have a subwoofer when using these speakers?
For deep rich sound, one will still need to have a subwoofer in their speaker arrangement.
If it is the quality you need then the Pioneer TS-A6996S is the best speaker for your needs. It can easily and neatly fit into your vehicle and easily link with your existing sound system. Its sound is amazing for a speaker in its category and one can easily forget that its output is 650 Watts on the list.
It also provided the best value for money for speakers in its category. Pioneer never disappoint and this time with the Pioneer TS-A6996S they have lived up to their reputation. Pioneer deliver consistency when it comes to audio products and the Pioneer TS-A6996S will bring life to your music collection.
I had recently bought a new car, and I was really excited to get driving in it. Everything about it was great but the speakers weren’t as good as I’d hoped. I thought about getting some aftermarket speakers installed and decided to do some research before choosing the ones I wanted. I didn’t want to need someone to install them for me, I wanted ones that were easy to install myself. I also didn’t want to have to spend a huge amount of money, but I still wanted good quality sound. I wasn’t sure if I wanted to overhaul the whole system so I wanted speakers that would work with both the in car factory system, or a new one. I also knew I wanted one from a reputable brand. I found the new Kicker DS693 speakers and they were everything I wanted. They had great reviews and at a price that wouldn’t break the bank, I was thrilled.
Who are these speakers designed for?
Kicker designed these speakers for anyone who:
Has a very strict budget
Wants better sound quality than stock speakers
Wants to replace old speakers
Has 6” x 9” speakers
Wants to be able to self install
Kicker have been designing, developing, and manufacturing speakers since the 70s, and the years of experience they have is evident in the range of speakers they have available. Their slogan is “Livin’ Loud’’, and all of their speaker live up to it. The DS693 speakers are considered to be low end speaker, but Kicker have put their experience in sound technology and design into even their lower priced products. This means that these speakers are capable of incredible sound improvements over stock factory speakers, both with the stock audio system, or with an aftermarket system, while remaining one of the most affordable speakers on the market.
Wattage
The new Kicker DS693 speakers have 280 watts of peak power per speaker, so 560 watts per pair. They have 140 watts of RMS power per speaker, so 280 watts for the pair. This is at the lower end of wattage, but it is quite impressive for the price range that these speakers fall into. It does mean that if you want to use an amplifier then you need to be careful to make sure that the amp is compatible, and not too powerful for the speakers.
Installation
New Kicker develop speakers to be very easy to self install, so as long as the speaker hole is 6”x 9” then the DS693 speakers will drop in, for one of the easiest installation processes of any speaker. They come with all the hardware you will need to wire them and secure them in place.
The whole process is quick and simple to complete. You don’t need any specialist tools, and you can install the speakers yourself.
Compatibility
New Kicker DS693 speakers are compatible with a wide range of make and model of vehicle. They will fit most 6” x 9” speaker ports. They have a mounting depth 3 and 1/4 inches. As long as your vehicle has enough port space to accommodate the depth and size, then they will be compatible.
Sensitivity
The sensitivity rating is what will tell you how the speaker will respond to power. The higher the sensitivity rating, the less power that the speaker needs to maintain the same volume level. These Kicker DS693 speakers have 92dB.
Construction
The new Kicker DS693 speakers might be consider to be a budget speaker, but this doesn’t show in their construction and design. All the components are well made, sturdy and durable. They have a polypropylene woofer cone which vibrates the air, 2” polypropylene dome mid range for mid range frequencies, and a 1/2” PEI (polyether imide) dome tweeter for high range frequencies. They also incorporate Kicker’s Extended Voice Coil, or EVC technology. This means that Kicker designed the components to produce decent bass, and good overall sound quality.
They are very durable, as long as they have been broken in correctly then they will last for years.
Cons
They’re a little bulkier than other speakers
You need to follow the manufacturers instructions exactly
They work better with a custom built speaker box
There is room for improvement
Frequently Asked Questions
What comes in the box?
These speakers come as a pair and all the hardware is included. The box has two Kicker DS693 6” x 9” 3 way speakers, 2 speaker grilles, 2 12” lengths of speaker wire, 4 red butt connectors, 8 1” self tapping screws, 8 speed clips and an owners manual.
Will they fit my vehicle?
If your speaker ports are 6” x 9” and can accommodate a 3” depth, then they will fit your vehicle. If you don’t have the correct speaker size speaker ports then you will need to modify your vehicle for installation
What is the bass quality?
These speakers don’t need an amplifier to work, but they do have more potential and offer a higher sound quality if they are run through an amplifier. But they do still give impressive improvements over the stock speaker when run through the audio system.
Do they have a warranty?
Yes, they have a one year manufacturers warranty.
Are the Kicker DS693 speakers Marine grade?
They aren’t part of Kicker’s marine grade line of speakers.
The new Kicker DS693 speakers are highly recommended. They are in the low end price bracket, but they perform like speakers that cost much more. They are made from high quality, extremely durable materials, and are designed to give much better sound quality than your factory speakers. They work well with the factory audio system, but they do so much better with a compatible amplifier. They’re easy to install, and don’t need any extra tools. They have been known to blow if they aren’t allowed to break in. To break in your speakers, set them up, and for the first 30 – 40 hours play them at a reasonable volume. Then they will continue to break in for the next hundred hours. You can get playlists that are specifically designed for breaking in speakers, but almost any music will be suitable. If they are properly broken in, then there shouldn’t be any problems with them. Overall, they’re incredible speakers for someone with a very tight budget.
