Category: Speakers

The RCA jack is the standard connector for audio signals. It is also a phono jack, phone jack, or tip-ring-sleeve (TRS) connector. The name “phono” comes from being used initially to connect phonograph players to amplifiers. The RCA jack has three parts: the tip, the ring, and the sleeve. The tip is the end of the plug that goes into the socket first. The ring is in the middle, and the sleeve is on the outside. 

RCA plugs and jacks are used in various applications, including home stereo systems, car stereos, and professional audio equipment. They are also connected to video equipment, such as camcorders and DVD players. One of the most common uses for the jack is to hook up two amps.

Putting the RCA Jack to Use: Hooking Up Two Amps

If you want to hook up two amps with one RCA jack, you need to use a Y-connector. A Y-connector is a cable with one RCA plug on one end, and two RCA plugs on the other end. To use a Y-connector, connect the single RCA plug to the output of your first amplifier, then connect the two RCA plugs to the inputs of your second amplifier.

Remember that you will need to have separate left and suitable input jacks on your second amplifier for this setup to work correctly. If your second amplifier only has one input jack, you can use a mono-to-stereo adapter.

Tools and Materials Needed to Hook Up Two Amps with One RCA Jack

• Two amplifiers
• One RCA cable
• Speaker wire
• Electrical tape
• Wire cutters

Few Instructions to Help

First, you will need to disconnect the negative battery terminal in your car. That is to prevent any potential electrical shocks. Once that is done, you can begin connecting the two amplifiers. 

Take the RCA cable and plug one end into the first amplifier’s “line out” port. Then, take the other end of the RCA cable and plug it into the second amplifier’s “line in” port. Make sure that both amplifiers are turned off before doing this.

Next, you will need to connect each amplifier to its respective speaker. For this, you will need to use the speaker wire:

1. Cut two pieces of speaker wire, each long enough to reach from the amplifier to the speaker.
2. Strip about a half-inch of insulation off of each end of the wire. Plug one end of each wire into the “speaker out” port on each amplifier, and then screw on the binding post to secure it.
3. Take the other end of the wires and twist them around the metal terminals on your speakers.

Once everything is connected, you can turn on both amplifiers and test to ensure that everything is working correctly. If everything sounds good, then you are all done. Just be sure to tuck away any loose wires and tape down any sharp edges so that nobody gets hurt.

Now that you know how to hook up two amps with one RCA jack, you can enjoy your music without worrying about sound quality. That is a great way to get the most out of your audio setup and make sure that everyone can enjoy the music as much as possible.

 How to Hook Up Two Amps with One RCA Jack

The steps are essential because they ensure that you connect the amplifiers correctly and that everything is working correctly. By following these steps, you can be sure that your music is playing perfectly and everybody enjoys that: 

Step One

First, you will need to gather all of the necessary items. You will need two amplifiers, one RCA cable, speaker wire, and some electrical tape. Once you have all the items, you can begin hooking everything up.

Step Two

The second thing you will need to do is connect the RCA cable to the first amplifier. Once the RCA cable is connected, you can connect the other end of the cable to the second amplifier. Make sure that both amplifiers are turned off before connecting anything.

Step Three

Now that both amplifiers are connected with the RCA cable, you can now start connecting the speaker wire. Start by running the length of the speaker wire from the first amplifier to the second amplifier. Once you have done this, you can connect the other end of the speaker wire to the positive terminal on the first amplifier.

Step Four

Finally, you can now turn on both amplifiers. You may need to adjust the volume levels on both amplifiers to equal. After doing this step by step process, you can sit back and enjoy your music.

Summing Up

In conclusion, by following the simple steps and using the proper tools and materials needed you can better understand how to hook up two amps with one RCA jack. You can be sure that your system will run smoothly and sound great. 

While there are some minor disadvantages to using a splitter cable or daisy-chaining amps, these methods are still the best way to get great sound without purchasing additional equipment. 

Buy the system and level up its worth. Connect several speakers to your amp. We hope this guide will help you in a better way to hook up two amps with one RCA jack. 

FAQ’S: 

How do you amp up with an RCA jack?

It can be pretty challenging to have two amplifiers but only one input for everything to go through smoothly. The solution? Connect your RCA jacks (which connect directly into the speakers) with an appropriately sized splitter cable.

How to split RCA cable to connect two amplifiers?

You can use either a splitter cable or an RCA hookup wire to connect two amplifiers. With the first method of connecting splitters to outlets, plug one end into each amp’s input and output plugs, respectively, then attach them with twist locks at both ends for extra security.

In most cases, this will work well because it doesn’t require much manual strength when pushing down on these buttons. 

What are the disadvantages of using one RCA jack for two amps?

If you want to safely connect more than one amplifier, then this is not the way for you. For example, a single RCA jack was made with just enough power supply for ONE amp. But if we split it and put two amplifiers into each side of our speaker wire (or another audio signal distributor), both will share what little juice that comes out from where they’re connected on an individual channel. This means less efficiency overall. 

Where do I plug RCA cables into the amp?

If you are looking for an easy way to connect your amp with the help of RCA wires, then this is perfect. You will require two cables to achieve these results, and they can be purchased at most stores that sell electronics equipment.

If you’re reading this, we know you’re probably irritates because a fuse keeps blowing in your car. When an electrical current flows through a conductor, such as a wire, some of the energy is lost in the form of heat. The fusible element in a fuse is designed to melt when too much current passes through it, interrupting the flow of electricity and protecting the circuit from overheating.

Don’t Blow Your Stack When Your Fuse Keeps Blowing

If your car’s fuse keeps blowing, you’re going to need to take some steps to diagnose and fix the problem:

• First, you’ll want to check the fuse box for any apparent signs of damage.
• If there is any corrosion or burning, this is likely the root of your problem.
• Next, you’ll need to identify which circuit is causing the problem.
• You can do this by disconnecting each fuse one at a time and seeing if the blowing stops.
• Once you’ve found the problem circuit, you’ll need to figure out what’s causing too much current to flow through it.
• This could be a short circuit, an electrical leak, or a component drawing too much power.
• If you’re not sure how to fix the problem, it’s best to consult a professional mechanic.
• They’ll be able to diagnose the problem and make the necessary repairs.

What to do if the fuse keeps blowing in car

There are several reasons why your car’s fuse might keep blowing:

-A short circuit somewhere in the electrical system

-A faulty component, such as a stereo or other accessory

-A problem with the wiring

-A bad connection

If you’re having trouble pinpointing the problem, it’s good to take your car to a mechanic or an auto electrician. They will be able to diagnose the issue and make any necessary repairs.

That can be a frustrating problem, but there are some things you can do to try and fix it. First, check all of the connections in your electrical system, including any aftermarket components like stereos or alarm systems.

Ensure that everything is connected correctly and that there are no loose wires. If everything looks good, the next step is to check the fuse box.

Ensure that all fuses are tight in their sockets and that there are no burnt out or damaged fuses. If you still can’t find the problem, it’s time to take your car to a professional.

What Next for a Blown Fuse?

If you have checked all of the connections in your electrical system or speakers and everything looks good, the next step is to check the fuse box. Ensure that all fuses are tight in their sockets and that there are no burnt out or damaged fuses. 

If you still can’t find the problem, it’s time to take your car to a professional. With their help, you should be able to identify and fix the issue quickly.

Troubleshooting Blown Fuse Issues in Your Car

If your car’s fuse keeps blowing, it can be frustrating and leave you feeling helpless. However, there are some steps that you can take to troubleshoot the issue on your own.

Start by checking your car’s owner’s manual. It will have a fuse box diagram and show you what each fuse corresponds to.

Once you have located the blown fuse, use a pair of needle-nose pliers to remove it from the socket. Then, insert a new fuse of the same amperage into the socket and reattach the panel or cover. Test your electrical system to ensure that everything is working correctly.

If you are still having issues with blown fuses, it is best to take your car to a qualified mechanic or auto electrician for further diagnosis and repair. They will be able to pinpoint the root cause of the problem and make any necessary repairs. Continuing to drive with blown fuses can damage your car’s electrical system or sound system and cause more severe problems down the road.

The top common causes of a car fuse that keeps blowing:

1. Fuse amp rating too small
2. Short in the wiring
3. Failed component
4. Overload in the circuit the fuse to blow.
5. Bad fuse
6. Faulty wiring

Fuse amp rating too small

One of the most common reasons a fuse will keep blowing is because it is not the proper amp rating for the circuit.

If you have a 20-amp fuse in a circuit that requires 30 amps, the fuse will frequently blow because it is not rated to handle the amount of current flowing through it.

You need to replace the fuse with the correct amp rating to fix this problem. The rating should be printed on the side of the fuse, so be sure to check before purchasing a replacement.

Short in wiring

Another common reason for blown fuses is a short circuit in the wiring. That can happen if there is a frayed wire or loose connection somewhere in the system.

When a short circuit occurs, many current flows through the circuit, causing the fuse to blow.

To fix this problem, you need to find the source of the short and repair it. That may require some troubleshooting, but it is usually a reasonably easy fix.

Failed component

Another possible cause of a blown a fuse is a failed component. That can be something as simple as a burned-out light bulb or, more serious, like a failing alternator.

If you suspect that a failed component is the reason for your blown fuse, you will need to have the car inspected by a mechanic to diagnose the problem.

Replacing a blown a fuse is usually a quick and easy fix. However, if the fuse keeps blowing, it could indicate a more severe problem. Check for other issues before replacing the fuse to avoid damaging your car’s electrical system.

Overload in the circuit

Another potential cause of blown fuses is simply having too much load on the circuit. That can happen if you are trying to run too many electrical devices at once.

For example, if you have a stereo and subwoofer hooked up to one circuit and try to add another appliance, such as a heated seat, the fuse may blow because the circuit is overloaded.

You need to either remove some of the devices from the circuit or add another fused circuit to accommodate the additional load to fix this problem.

Bad Fuse

Sometimes, a fuse will blow because it is simply faulty or bad. For example, this can happen if the fuse is old or has been damaged. If you suspect that the fuse is wrong, you can test it with a multimeter to see if it has continuity.

If the fuse does not have continuity, it needs to be replaced. You can purchase replacement fuses at most auto parts stores.

Faulty Wiring

Another potential cause of blown fuses is faulty wiring. That can happen if the wires are frayed or broken, which can cause a short circuit. Again, you need to repair or replace the damaged wiring to fix this problem.

That may require some soldering, so it is best to consult with a professional if you are not experienced in this area.

The Bottom Line

So, what do you do if the fuse keeps blowing in car? The steps mentioned above will help you to diagnose and fix the issues. The first step is to try and identify what caused it. Next, you can troubleshoot fuse issues in your car by checking the wiring, components, and amps. 

If you’re still having trouble after checking these things, it’s time to take your car to a mechanic for further inspection. Remember, prevention is always the best cure, so keep an eye on your car’s electrical system or sound system and replace blown fuses as soon as possible.

FAQ’s

Why does my car keep blowing fuses? What should I do if my fuse keeps blowing?

Blown fuses are a big problem. The simple fix can often be replacing the fuse and testing your car again, but when they don’t go away after two or three tries, then there might need to do some deeper troubleshooting to find out what is going on with the circuit breaker box (or whatever device you’re dealing).

What is the purpose of a fuse in a car?

The automotive fuse is a small device that protects against overloading and burning by cutting off electricity flow when it detects too much pressure in one place. It’s easy to replace yourself; just break open the casing near where you’ll find two metal prongs that can be pushed apart with your fingers or punched out if they’re stuck together tightly enough.

Can a short circuit cause a fuse to blow?

Fixing a short in the electrical system is much easier than identifying where there’s trouble. For example, it may be just one bad connection between two conductors, which would cause an overload and blown fuse instead of what you think it might have been – like overheating wiring or melting plastic.

Powered Subwoofers: Audio Power in A Box

Powered subwoofers are designed to reproduce low frequencies that cannot be accurately or clearly reproduced by other types of speakers, such as all-purpose stereo speakers, mids, and tweeters. The frequency response varies between subwoofers and depends on a number of factors, including the size of the subwoofer, the amplifier, the type of enclosure, and the power rating. 

In this guide, we will explore these details and more to determine the best powered subwoofers. We will also review the top three powered subwoofers on the market today. Read on to learn more about what makes the best powered subwoofer. 

Powered Subwoofers Explained

In general, larger, high-power subwoofers contained in enclosures designed to reproduce low bass notes produce the lowest frequencies. Depending on the design, the frequency response can extend below 20 Hertz (Hz), which is below the range of human hearing. 

Similar to other types of speakers, a powered subwoofer’s cone can be made from a variety of materials. These include paper, synthetic materials, and combinations of the two. Although paper doesn’t last as long as other materials, it does provide a quick response to the audio due to its lower density construction. 

The cone’s material also affects the audio quality of the subwoofer, but cone preference is largely subjective, or it depends on what the listener likes best.

A powered subwoofer can be used in any application where a passive subwoofer is applied. Common applications include automotive sound systems, home audio, music production, and live musical events. For applications requiring the fewest components and those where space is highly limited, a powered subwoofer is a good option because the amplifier is contained inside the enclosure, allowing it to take up less space.

The types of powered subwoofers available vary in cost and style according to their uses. Typically, large subwoofers measuring at least 18 inches (45.72 cm) designed for live events cost more than those designed for home theaters and vehicles. Powered subwoofers designed for music production also tend to cost more than home and car audio subwoofers. 

The higher costs are attributed to higher power ratings and increased accuracy when reproducing audio, respectively. In terms of style, the enclosures used for car audio subwoofers typically provide more options, including a larger number of colors to choose from and carpeted enclosures.

Like passive subwoofers, it is possible to build a powered subwoofer from components or a subwoofer kit. A kit for a powered subwoofer contains the subwoofer, an amplifier, audio connectors, and hookup wire. The hookup wire connects the subwoofer to the amplifier internally and permanently, while the audio connectors allow the subwoofer to be connected to a sound source, such as an audio interface or stereo receiver. 

In some cases, additional audio connectors are provided, so the sound can be sent from the subwoofer’s internal amplifier to other speakers, such as mids and tweeters that handle higher frequencies.

Some kits also include additional components, such as an enclosure, speaker batting, and a crossover. Speaker batting absorbs audio reflections inside the subwoofer’s enclosure, allowing the bass frequencies to be deeper and reproduced with a flatter frequency response. 

The crossover splits the incoming audio signal into separate frequency bands and sends the lowest frequencies to the subwoofer. If a crossover isn’t included, it might be built into the subwoofer’s amplifier.

How Will You Integrate Subs Into Your PA System?

There are several ways of adding subs into your system. One of the simplest is to create a sub-mix on your mixing console where you send the kick drum and bass to the Aux output and then connect that to your powered subwoofer. 

Other options include running your subwoofers in parallel to your main PA speakers if your subs have high pass filters. In more complex setups you will use a crossover unit to split the frequencies before sending the signal to your subs. 

Your Type of Music & Driver Size

Acoustic performers and folk style bands will find the smaller 12″ drivers provide all the bottom end they need, but if you perform bass heavy styles then you’ll need larger drivers that are capable of moving a lot more air – this is particularly true for EDM style DJs.

Use as Stage Monitors

Many drummers and sometimes bass players use a powered subwoofer in addition to a standard stage monitor in order to get a full punchy bottom end on stage.

Portability

Generally speaking, powered subwoofers aren’t entirely portable friendly, being an extra speaker that you have to lug around. But for many, the added effort, space requirements and weight of subs are justified by the sound they produce. Still, it will be wise to weigh your low-frequency needs versus your convenience and mobility. 

If you’re a solo performer with no one to help you carry your gear, then go for lighter subs, or maybe no subs at all. Even with bulky subwoofers, you may want to look for mobility features like built-in rolling casters.

To solve the problem of inadequate power from a specific receiver or amplifier, powered subwoofers (also referred to as Active Subwoofers) are utilized. This type of subwoofer is self-contained. It features a speaker/amplifier configuration in which the characteristics of the amplifier and subwoofer speaker are optimally matched and encased in the same enclosure.

As a side benefit, all a powered subwoofer needs is a single cable connection from a home theater receiver or surround sound preamp/processor line output (also referred to as a subwoofer preamp output or LFE output). 

Whether a subwoofer is passive or powered isn’t the determining factor on how good the subwoofer is. However, powered subwoofers are by far the most commonly used as they have their own built-in amplifiers and are not dependent on any amplifier limitations of another receiver or amplifier. 

This makes them very easy to use with home theater receivers. All home theater receivers come equipped with either one or two subwoofer pre-amp line outputs that are specifically designed to connect to a powered subwoofer.

On the other hand, the external amplifier required to run a passive subwoofer may be more expensive than the passive subwoofer you have.

In most cases, it is more cost-effective to buy a powered subwoofer in place of a Passive Subwoofer. If you still choose the passive option, the subwoofer pre-out from a home theater receiver has to connect to the external subwoofer amplifier’s line-in connection, with the external amplifier’s subwoofer speaker connection(s) going to the passive subwoofer.

The only other connection option is that is available for a passive subwoofer is that if the passive subwoofer has in and out standard speaker connections, you can connect the left and right speaker connections on a receiver or amplifier to the passive subwoofer and then connect the left and right speaker output connections on the passive subwoofer to your main left and right front speakers.

In this type of setup, the subwoofer will “strip off” the low frequencies utilizing an internal crossover, sending the mid-range and high frequencies to the additional speakers connected to the subwoofer’s speaker outputs. This eliminates the need for an extra external amplifier for the passive subwoofer but may put more strain on your receiver or amplifier because of the demands for low-frequency sound output.

The Exception to the Subwoofer Connection Rules

Many powered subwoofers have both line input and speaker connections. This enables it to accept signals from either an amplifier’s speaker connections or an amplifier/home theater receiver subwoofer preamp output connection. 

However, in both cases, the incoming signal goes through the powered sub’s internal amps, taking the load off the receiver.

This means that if you have an older home theater receiver or amplifier that does not have a dedicated subwoofer preamp output connection, you can still use a powered subwoofer with both standard speaker connections and line inputs.

The Wireless Connection Option

Another subwoofer connection option that is getting more popular (only works with powered subwoofers) is wireless connectivity between the subwoofer and the home theater receiver or amplifier. This can be implemented in two ways:

• The subwoofer comes with a built-in wireless receiver and also provides an external wireless transmitter that plugs into the subwoofer line output of a home theater receiver or amplifier.
• You can purchase an optional wireless transmitter/receiver kit that can connect to any powered subwoofer that has a line input and any home theater receiver, AV processor, or amplifier that has a subwoofer or LFE line output 

Top 3 Powered Subwoofers

Polk Audio HTS 12 Powered Subwoofer

The Polk HTS 12 subwoofer enhances home theater and music listening experience with powerful deep bass. Its long-throw Dynamic Balance 12” driver, patented floor-firing Power Port design and a state-of-the-art 400W Class D amplifier deliver an extended bass impact while minimizing distortion. 

This powered subwoofer has easy to access controls for volume, low pass filter, and phase correction. Connect via LFE (unfiltered / low pass disabled) or stereo line level RCA inputs. Set power toggle to Auto on/off for fast and easy on/off power switching in the sub and other home theater equipment. 

Curved edges offer a sensual yet powerful look that blends in with any home decor. With a deep bass impact you can feel across all your home theater and music needs. 

Highlights

• High efficiency subwoofer for small to medium-sized rooms – The HTS 12 features a 12″ front-firing long-throw woofer with Polk’s proprietary Dynamic Balance Technology designed to fill your room with immersive, three-dimensional sound in great clarity
• Your best bet with modern looks and thunderous performance – The sleek rounded corners are a highlight, but this sub will surely take your movie and music experience up a notch with its deep rumbling bass from the in-built 200-watt amplifier (400W at peak)
• Polk’s patented power port technology delivers deeper bass response with its turbulence-smoothing diffuser that transitions air flow from the speaker into your listening area minimizing any kind of distortion and delivering rich full-range sound everywhere
• Universal compatibility and versatility – The sub comes with LFE and stereo line level inputs. Pair it with any of Polk’s Signature series 2-channel stereo speakers or create a complete home theater with S60 tower, S20 bookshelf and S35 center channel speakers
• All controls on the rear panel – Controls for volume, low pass filter and phase toggle for optimum bass levels (0 to 180 degree) are in close reach – right on the back of the subwoofer. The front has a clean rich look with detachable grille
• Polk’s commitment and expert craftsmanship with their use of advanced technology, master engineering, and innovation helps them bring out the best in sound systems and speakers so you can sit back, relax and listen with your heart

Kicker L7R Powered Subwoofer

With a unique square design that moves more air to produce deeper, more powerful bass, the Kicker L7R 12-Inch 1200-Watt Max 4-Ohm DVC Square Subwoofer was built to pack serious sound into every square inch. 

This dual voice coil subwoofer features 4 ohms of impedance, 1,200 watts of max power, and 600 watts of RMS power. It features an injection-molded SoloMon woofer design, UniPlate back plate and pole piece, nickel-plated speaker terminals, and 360-degree back bracing with a bumped back plate and steel basket. 

This 12-inch square subwoofer has a mounting depth of 6.875 inches and a cutout diameter of 11.0625 inches. It’s recommended in sealed boxes with between 0.88 and 2 cubic feet of airspace, and in vented boxes with between 1.75 and 3.25 cubic feet.

Samsung 3.1 Powered Subwoofer

The Samsung 3.1 powered subwoofer explores realistic 3D audio with sound precisely projected from above, in front, behind and to the side of you with the latest acoustic technologies. The complete audio entertainment experience with 3 channels, 1 subwoofer and 2 up-firing channels. 

Audio that tracks each scene with perfectly synchronized audio from your compatible Samsung TV and soundbar for a harmonious, cinematic experience.

With Alexa built into your soundbar, utilize all of Alexa’s functionality including playing music, asking about the weather and more–without needing a separate device. Emphasizes the voices in each scene so you can hear every line of dialogue clearly. 

Get pulled into what you’re watching with panoramic sound that moves with the action on-screen. Level up with 3D directional audio from up-firing speakers. Acoustic Beam and powerful woofers automatically sync sound with the on-screen action, while crosstalk cancellation minimizes distractions. 

Car stereo system is an essential accessory in any car. However, it demands constant power surge, and this is where a second battery for car audio system comes in. This extra car battery is solely dedicated to the stereo system. Just like an ordinary car battery, stereo battery should be in line with modern technology, and it should be packed with essential features.

Adding an extra battery for car audio will ensure that your car sound system is on point to hit those numbers regardless of whether it is a short or long car adventure.

Types of Car Audio Batteries

Car audio batteries, just like other batteries, come in different types and what works in one vehicle sound system may not work in another one. Knowing the difference between the various types will help you determine the right one for your car audio.

• Calcium-Calcium:  This type of battery is made up of calcium plates that are charged separately. Calcium helps to reduce the discharging rate by reducing the amount of fluid that is lost.
• Deep Cycle: The deep cycle battery is highly durable and comes with thick plates which help increase its capacity charge. It, however, has a high discharging rate.
• Wet Cell: Wet cell batteries are spillproof, and the good thing is you don’t need to top up the fluid. The plates are suspended in the fluid, but they are well insulated. As a result of this, they are regarded as the best maintenance- free batteries.
• VRLA (Valve-Regulated Lead-Acid): VRLAs comes with lead acid and safety valves that ensure safe operation. They are also entirely sealed necessitating full replacement in case of any malfunction.
• Lithium-Ion (Most expensive): This battery is the most expensive type, but it stores a lot of energy. It, therefore, has limited use, especially in electric automobile, although still a good number of vehicles use this battery.

Our Review Process

Finding a backup battery for car audio music system is not an easy task. It is even more frustrating to deal with a dead battery. That’s why we are here help you chose the best battery and make your car have the best sounding system in 2019.

During our survey, we made it a priority to capture the quality and performance of various brands as well as crucial features. Batteries cca was tested against the number of watts produced to establish if the two were well synchronized.

We ended up with a list of 10 top rated car audio batteries.

That’s said; let’s have a look at what these batteries have to offer. Don’t forget to go through our buying guide to help you pick the best aftermarket backup battery for your car.

1. 100 Ah LiFePO4 (Overall Best Battery In the Market)

From the house of LifePo4, we present to you this high output car audio battery, which is one of the most versatile and reliable batteries available in the market today. It is a high cranking amp battery, packed with extraordinary features. Its maintenance-free operation translates into many years of service, making it a must-have car battery for the sound system.

100 Ah LiFePO4 Key Highlights and Benefits

• Cutting Edge Specs:  With a whopping 1000 cca, this 12 volt and 100 -hour battery don’t require any hardware for it to run your sound system. All you need to do is just fit it in the battery tray, and just like that, you have a separate battery for car audio. It is also a low-profile car battery, which means that it doesn’t take much space.
• Battery Management System (BMS): The Power Control Board (PCB) has incorporated the battery management system, which is the heart of this battery. This system offers protection against short-circuit, reverse polarity, low and over-voltage, as well as balancing the charge and voltage of individual cells. The BMS also allows you to connect several 100 Ah LifePO4 batteries parallel to each other without the need for any external protection.
• Circuit Boards: The circuit boards are aligned throughout the length of the cells to help control the pressure, current, and temperature. If for example, if there is a case of high internal pressure, the boards will respond by an automatic voltage cutoff which is going to cut off the positive and negative current. These circuit boards also help to prevent any damage to the battery from the short-circuited cell.
• Solid Construction: The 100Ah comes with an ABS casing with each cell terminal welded to a plate to help provide a solid ground for both electrical and physical connection. In addition to this, each cell has three layers for safety protection, which helps to extend the lifespan of this audio battery. The recommended cold-cranking amps for this unit is 1000 making it appropriate during winter.

Pros

• It takes little time to recharge; roughly about 3 hours
• It can withstand very high charge rates .i.e. 100A
• This battery does not freeze even in extreme temperatures.
• It does not need to be fully charged for storage rather it can be stored at any state of charge(SOC)
• It is lightweight and its weight is almost half of its lead-acid counterparts.

Cons

• It is not the cheapest option.
• Not suitable to be used as a cranking battery.

Our Verdict: With the impeccable features and specs, 100 Ah LiFePO4 has earned this position rightfully and we believe that this is the battery that you need to upgrade your sound system power needs and you will be assured of uninterrupted performance.

This battery is a definite pick if you are serious about a complete overhaul of your car’s audio charge system.

2. Odyssey PC680

Odyssey PC680 is specially built in rugged construction to help it withstand the forces of nature that it may encounter while on the road. It offers fantastic features and it is also one of the most affordable batteries in the market today making it a perfect choice in cases where your battery dies without a warning.

Odyssey PC680 Key Highlights and Benefits

• Faster Recharge and Remarkable Mounting Flexibility: Recording one of the best recharge efficiency on the market, Odyssey PC680 is capable of hitting the 100% charge mark in just 4 to 6 hours.  Installation of this second unit is pretty easy as it comes in a non-spill design, which makes it easy to mount it in any position without worrying about spills.
• Vibration and Temperature Tolerance:  Odyssey PC680 has incorporated a design that is resistant to vibrations and high impact shock that the car may be subjected to while on the road. This car audio battery is also best known for its high tolerance to extreme temperatures.   Any variation in temperatures has no or minimal effects if any.
• The Absorbed Glass Mat (AGM) and Valve Regulated Lead Acid (VRLA) Technologies: Combination of these two technologies makes PC680 function as dual battery car audio; one with tremendous cranking power and also with deep-cycle reserve power. This battery can support both applications as opposed to traditional units, which can accommodate only one of the applications. The additional thin and densely packed plates make this battery provide twice as much power as conventional batteries.
• Longer Cycle Life: Odyssey PC680 has about 70% extended life cycle life when compared with traditional units. In addition, it has 400 cycles at an 80% level of battery discharge, and also high and stable voltage for an extended period of time. This makes Odyssey PC680 the ultimate battery backup for car subwoofers and amplifiers.

Pros

• Odyssey PC680 is resistant to mechanical vibrations and is not affected by extreme temperatures.
• It has a longer cycle life as compared with other deep cycle batteries; usually 70% more.
• Fast and quick recharge as it takes about four to six for it to be fully charged.
• It is completely sealed meaning no spillage which allows for flexibility during mounting.
• It has an average of 400 cycles at 80% depth discharge which leads to high voltage for an extended period of time.

Cons

• With only 170 cold-cranking amps, it is not appropriate in extremely cold temperatures.
• PC680 does not come with terminals.

Our Verdict: PC680 is well designed to take care of all your power needs in its long-lasting design. Its intrinsic features make it the best battery for the money.

Order Odyssey PC680 today on Amazon and brace yourself for constant and long-term power supply.

3. ACDelco ACDB24R

ACDelco ACDB24R is a maintenance-free car audio battery that is spillproof and also comes with AGM technology. This design allows you to work without worrying about the common battery’s problem of acid leaks. Also, the included valve-regulated technology makes sure that this battery will give you three times the life cycle of an ordinary battery.

ACDelco ACDB24R Key Highlights and Benefits

• Absorbed Glass Mat (AGM) Technology: The AGM technology makes sure that there will be no spills or leakages from this stereo battery. Besides, it does not leave room for any maintenance as it seals the battery completely. In addition to this, it boosts the amount of power that this battery produces making it one of the most powerful car audio batteries on the market.
• Valve Regulated-Gas Recombinant Technology: ACDelco ACDB24R makes use of Valve Regulated-Gas Recombinant Technology to boost its performance. This technology helps prevent gas leakages for safety purposes, and also it ensures a prolonged lifespan. It can last three times more than traditional units. However, it is susceptible to mechanical vibrations.
• Calcium (Positive and Negative) Plates: This battery comes with calcium plates, both positive and negative. These plates help to reduce the discharging rate when the battery is not in use. Also, it has power grids that help to increase the cranking power amps during the same period. Additionally, the high-density oxide plates help to increase the number of watts produced by this audio battery.
• Silver Calcium Alloy: In addition to the calcium plates, this car amplifier battery has an additional alloy of calcium and silver. This alloy acts as the cathode for optimizing conductivity and performance. Besides, the fusion of these two metals helps to strengthen the battery with internal low- resistance. This, in turn, increases the audio power back up.

Pros

• ACDelco ACDB24R is resistant to leaks and spills.
• It is maintenance-free due to its sealed nature.
• It has up to 3 times the cycle life of many traditional units.
• The battery can be stored off-season thanks to its frame grids and calcium plates.
• Its high-density oxide plate provides outstanding levels of power.

Cons

• The battery is prone to mechanical vibrations.
• It has very small and non-standard terminals.

Our Verdict: ACDB24R from ACDelco is an efficient battery that will perfectly provide you with that powerful ignition that you have always wanted free from any hitches.

Don’t be afraid to grab this all-inclusive battery while it lasts.

4. Optima Batteries 8025-160

The reliable 8025-160 from Optima is designed to deliver robust power to your car audio every time your sound system is in operation. It is also designed to withstand extreme launches and extreme weather conditions. Also, it features popular technologies that make it resistant to common causes of battery failure, which is why optima battery is the best.

Optima Batteries 8025-160 Key Highlights and Benefits

• Spiral-Cell Technology:  This battery adopts spiral cell technology as opposed to AGM technology which is composed of 99.99% pure lead plates coated in lead oxide. This design makes 8025-160 more tolerant to temperatures and automated processes in an attempt to keep up with the required performance and quality.
• Works Well in Extreme Conditions:  The 8025-160 is known to work efficiently even in extreme conditions where it delivers sufficient starting currents. This battery is not damaged even in situations where the charge drops deep or when it is stored for long periods. It is also not affected by occasional mechanical vibrations.
• Sufficient Cold Cranking Amps: With as high as 720 Cold Cranking Amps, 8025-160 is one of the most robust car audio batteries delivering fast ignition in any weather. It is also very consistent in each startup, making it the right battery for your car. Besides, it does not require any maintenance as it is sealed completely, necessitating a new battery in case of any damage.
• Faster Recharging: Just like other optima batteries, 8025-160 has speedy recharging, which is precisely what you need for your car audio system.  It is also has a slow discharging rate, and it is not damaged when the charge gets low. When it comes to the installation, it has multiple mounting orientations thanks to the spillproof design.

Pros

• The battery has optimal starting power irrespective of temperatures.
• It does not require any maintenance.
• It can be mounted in multiple positions as it is spillproof.
• Improved resistance to vibrations; about 15 times that of traditional units.
• High recharging rate.

Cons

• In some cases, it may have a reduced lifespan.
• It is slightly specialized and may not be compatible with some audio systems.

Our Verdict: Everything is optimal with Optima Batteries 8025-160; optimal power, optimal resistance, and overall optimal performance.

Check this powerful equipment on Amazon and see its astonishing ratings.

5. ExpertPower EXP1290-2

This rechargeable EXP1290-2 from Expert Power has made a name for itself in the lead acids batteries market as one of the most preferred car audio batteries. Packed with user-friendly features to give you peace of mind and its high durability make it stand out amongst its close competitors as one of the most powerful car audio battery.

ExpertPower EXP1290-2 Key Highlights and Benefits

• Compatibility with Essential Equipment:  ExpertPower EXP1290-2 is fully compatible with most APC backups giving you stress-free operation, especially when you are required to connect your battery to such applications. It also has a slow discharging rate that keeps your car rocking during long road trips. However, it needs more time to recharge fully.
• AGM Technology: This technology works in a way that ensures maximum absorption of the acid by the plates. Also, it prevents any spills, and at the same time, it allows the battery to operate over a wide range of temperatures. This helps to prolong its life cycle. In addition to this, it is valve regulated meaning it requires close to nil maintenance as you don’t have to check the distilled water level.
• Rugged Design for Durability:  The sturdy design makes it perfect for rough situations and unfavorable weather conditions which ensure durability. The battery is also relatively light, which provides ease of installation. This is simplified further by its user-friendly nature as it will only take a few minutes to get your system up and running.
• ABS Plastic Casing: This battery features some of the best battery terminals that are enclosed in non-conductive ABS plastic.  This casing makes it work well even in very high temperatures. This material is also safe to hold with your hands, bearing in mind that the battery is also spillproof.

Pros

• It has incorporated a technology that allows for very slow self-discharging.
• It uses the AGT allowing it to operate over a wide range of temperatures.
• ExpertPower EXP1290-2 is maintenance-free as it is valve-regulated.
• The battery is durable, and its design allows easy setup.
• It is highly resistant to heat as it is enclosed in a non-conductive ABS plastic

Cons

• It tends to deteriorate when stored for long
• The battery needs time more to be fully charged as compared with other batteries in our review.

Our Verdict:ExpertPower EXP1290-2 comes in easy setup and safe operation saving on time and resources. It also includes a couple of user-friendly features, making it the best car battery for your sound system.

This battery is more than affordable, which is why you should not miss this rare chance to improve your car audio power system.

6. Kinetik HC600 BLU Series

Kinetik hc2400 blu is designed to provide your car audio with optimal power without overworking the car’s primary battery. It is powerful enough to run your audio systems as it puts out 600 watts.  Anything more than that may require you to get an alternative battery. However, it has all it takes to get your sound system running.

Kinetik HC600 BLU Series Key Highlights and Benefits

• Top-Notch Specs: Kinetik car audio batteries deliver more than the expected power, and Kinetik HC600 BLU is no exception. It can be used to power your sound system alongside the car engine. It is lightweight and delivers high amps while its AGM presentation provides an elongated battery life and increased performance.
• Perfect Replacement for your Car Standard Battery:  The Kinetik HC60-BLU can be used as an alternative battery to your ordinary car battery on top of upgrading your sound system power. Its lack of external opening and it been leakproof makes it perfect to be used in many places without dangerous leaks.
• The resistance of Extreme Conditions: With 600 Cranking Amps and an 18 amp hour rating, the HC600-BLU is designed to resist vibrations and extreme temperatures.   This means that this battery is ready to get powered up and ready to go anywhere, anytime, and under all circumstances. The non-leak design ensures safe operation and enhanced durability.
• Sealed in ABS Plastic Case:   The HC60 BLU delivers a high load of voltage packed in the extra plates. This results in low ESR, which translates into an additional amount of power and strong density. This is reinforced by the ABS plastic casing which seals the battery entirely and makes it resistant to excess heat. This casing also offers good resistance to vibrations and ensures minimal maintenance.

Pros

• It comes with an absorbed glass mat for improved durability.
• It can comfortably accommodate a car audio system with 600.
• The included extra plates make it have low ESR.
• It has been reinforced with 800 amps of power, which means improved performance.
• It comes in a non-leak design.

Cons

• It requires an AGM battery charger for it to be adequately charged.
• Exclamation CircleThe battery may experience dimmed lights at 700 watts if it is not well maintained.

Our Verdict: Kinetik delivers high-quality and high-performing products. HC600 BLU Series provides you with enough power for your music needs, and we confidently recommend it.

Check HC600 BLU Series on Amazon for the latest prices.

7. DieHard 02838228

Diehard produces highly durable and sturdy dual car audio batteries which is evident in the 02838228 car audio battery. It has cutting-edge features which include the ability to recharge quickly to produce extra power. It is also capable of retaining more electrolytes than most batteries in this category. It is a heavy-duty battery with 20 times more vibration resistance.

DieHard 02838228 Key Highlights and Benefits

• It is Well Protected Inside Out: The 02838228 features a tamper-free design that is resistant to heat. This provides you with a piece of equipment that is protected inside out, which is an assurance that all the internal components are safeguarded.  It also presents an image of sophisticated equipment for the money.
• Improved Durability:  With 20 times vibration resistance, 02838228 offers you a longer lifespan than any other battery in our top battery brands.  Its life cycle is twice that of ordinary batteries, recharges twice as faster, and is slow to discharge. As such, you can rock for hours uninterrupted, and the good thing is that you can store it in any state of charge.
• Incorporation of AGM Technology: The AGM technology has varied applications as evidenced with most of the batteries that we have reviewed.  DieHard 02838228 has incorporated the AGM technology to hold as many electrolytes as possible. This minimizes the number of electrolytes consumed, enabling the battery to deliver maximum amounts of power.
• Cutting Edge Technologies: The DieHard 02838228 is truly the hub of technologies and invaluable applications. From the AGM technology, spillproof design, quick recharge, to its ability to work under undesirable conditions while retaining a good number of electrolytes. The plates are fully optimized to prevent any accidents during operation.  This is what makes it an excellent choice for a top audio system.

Pros

• This is a heavy-duty battery offering 20 times vibration resistance
• Improved power time with a minimum of two hours of power time.
• Its Spillproof design helps to prevent any acid leaks.
• The fully optimized negative and positive plates help to prevent electrical shorts.
• cIt encompasses a superior AGM design to enable it to work under elevated temperatures.

Cons

• It is relatively expensive.
• Exclamation CircleMaybe heavy and bulky as compared with similar models.

Our Verdict: The DieHard 02838228 is nothing short of quality performance. It is the best buy if you are on a budget with no compromise on performance.

Fit this battery in your car today if you are looking for good cheap car batteries.

8. Shorai LFX36L3-BS12 – Eco-Friendly Battery

Shorai LFX36L3-BS12 is the only battery in our review that is conscious of the environment. It decomposes naturally after discharging and disposing of. This is, of course, preceded by many years of consistent performance and constant power to your audio system. This makes LFX36L3-BS12 the right choice if you are looking to add a second battery to your car.

Shorai LFX36L3-BS12 Key Highlights and Benefits

• Safe Operation:  Shorai LFX36L3-BS12 has been designed with safety in mind thanks to the non-spill construction. It is completely sealed such that no gas explosives can occur during charging, which can be a big safety hazard to both humans and the environment. This aspect makes LFX36L3-BS12 the safest option out there.
• Eco-Friendly: This battery is friendly to the environment both during use and after use. As stated earlier, it does not emit gas sparks during charging making it safe for use. The battery also requires that you discharge and dispose of it when it is no longer in use, where it decomposes naturally.
• Lightening Recharging: Shorai LFX36L3-BS12 has a superfast charging rate which is done twice every 12 months depending on use and as well storage temperatures. This battery is a deep cycle battery meaning that it is easy not easily damaged even when the charge capacity drops meaning it can still fire your system even when the charge is low. It also has a slow discharging rate.
• Considerably Lightweight:  Shorai LFX36L3-BS12 is considered as one of the lightest car audio battery weighing just a fifth of an average Lead-acid battery. This adds to your convenience, not forgetting the massive power capacity. Aside from the weight aspect, this stereo battery has a sturdy casing that keeps it free from vibrations and overheating for improved durability and strength.

Pros

• The battery casing is resistant to heat and vibrations.
• It is quite light. It is 1/5 that of other lead-acid batteries.
• It quickly recharges, and the charge can last all year long.
• checkIts design does allow for any leakage during charging.
• The batter is eco-friendly, and it can be disposed of immediately after discharging.

Cons

• Relatively expensive, about 25% than ordinary batteries
• Exclamation CircleContinuous charging could affect the efficiency of the battery over time.

Our Verdict:This may be the only chance to make a difference and save Mother Nature. This is because Shorai LFX36L3-BS12 guarantees you safe disposal after use, and not forgetting it is a high-performance car battery

Consider Shorai LFX36L3-BS12 for a whole different experience.

9. XS Power D3400

XS power is a big car audio battery, and it is the way to go if you are planning to go big on your car sound system. With an amperage of 3300, it can work well with systems that produce up to 3500 Watts. This is the reason why we recommend it for major upgrades because it is also a bit high on the price spectrum.

XS Power D3400 Key Highlights and Benefits

• AGM technology:  XS Power D3400 is a deep cycle battery and it features the popular AGM technology which holds the electrolytes between the plates in its non-leak and non-hazardous design delivering a longer life cycle when well charged.
• Corrosion Resistant: The absence of external vents means that the battery can be installed anywhere in the car.  It also means that there will be no leaks which can cause injuries and a lot of damage to the surroundings. Also, it can resist other forms of shocks, such as excess heat irrespective of the mounting position.
• Tons of Power: This 12 Volts deep cycle battery is powerful enough to upgrade or replace your car audio in a splint of a second.  It can also be used to power your car engine. In addition, it is resistant to vibrations in case you find yourself on turbulent grounds. With that in mind, this battery is a representation of a substantial investment.
• Mounting Flexibility: This battery offers numerous mounting positions thanks to its leak-free design. D3400 is fully sealed, which prevents any spills. The internal resistance is ultra-low, allowing you to mount it in any location. With this, you are assured of a hassle-free installation process. Also, its attractive design is a sign of its sheer quality.

Pros

• Highly versatile and is easy to install in multiple positions.
• The valve regulation coupled with spill protection makes it tough and highly durable.
• It can produce high amounts of power within a very short time.
• It can work in extreme weather and other unfavorable situations.
• It has low internal resistance.

Cons

• It is a bit expensive when compared with other batteries.
• Exclamation CircleIt feels and appears to be heavier than other models.

Our Verdict: With D3400, you should expect nothing less than enhanced performance and a prolonged life span. However, this comes at a price, but you can rest assured that each dollar will count.

Try XS Power D3400 and get value for your money.

10. Mighty Max Battery ML35-12

ML35-12 is a deep cycle battery that brings you the much-sought performance at a very affordable price. It is a heavy-duty battery that guarantees you high performance while outperforming close brands in this category. It can handle more intensive tasks while lasting more than expected; all this at just a fraction of your budget.

Mighty Max Battery ML35-12 Key Highlights and Benefits

• Corrosion-Free: Featuring a calcium alloy and the famous AGM technology, corrosion is unheard of. With that, you can concentrate on important issues without worrying about mess or maintenance. Also, it is easily rechargeable thanks to the deep-cycle feature. This feature allows you to use your battery for an extended time without impacting its lifespan.
• Valve-Regulated: Mighty Max is valve regulated, which means that it operates using valves that prevent overheating during charging. These valves release any extra gas, thus preventing potential damage to the battery. This operation helps to provide much-needed ventilation. Besides, ML35-12 works well in both hot and cold temperatures.
• The Flexibility of Mounting Positions: Mighty Max is not sensitive to various mounting positions as such it can be mounted anywhere in the car. Besides, it is small, handy, and lightweight, and as such, it does not add weight to your vehicle. It is also one of the most economical AGM batteries, and it is suitable for smaller cars and other applications.
• Sturdy Design: Mighty Max is designed to be sturdy enough to cope with vibration and shock while in use. Also, it can be subjected to a wide range of temperatures (very high/low) without compromising power delivery. Additionally, it is a sealed lead-acid battery, which means it requires minimal maintenance if any. This unit can also be used to power generators, boats, and other automotive tools.

Pros

• This rechargeable lead acid is complexly sealed, meaning it requires minimal maintenance.
• It is compact and small in size.
• It can operate in a wide range of temperatures and has a long lifespan.
• It is resistant to vibrations and other forms of shock.
• It is spillproof, so you do not have to worry about the corrosive lead-acid.

Cons

• The battery does not come with any accessories so you have to acquire them.
• Exclamation CircleIt takes longer to recharge.
• Exclamation CircleIt has a high discharge rate.

Our Verdict:This battery is packed with a number of technologies and applications that will have your audio system up and going. Why not try it today?

Check out our ML35-12 on Amazon and it is worth every hassle.

Selection Guide; what battery to buy for my car audio system

What’s a good battery for car audio? The factors highlighted below will help make an informed decision even as look at different variations offered by manufacturers.

Cold-Cranking Amps (CCA) and Reserve-Capacity

This is the ability of the battery to power the audio system in cold temperatures. A battery’s CCA should match the number of watts produced and the higher the number of CCA the higher the amount of power produced. As such you should always look out for these two elements.

Size and Fitting

The size should fit properly in the battery tray provided. You should check the dimensions provided in the user manual to see if it will fit. The positioning of the terminals should also be correct. This is important because just as with your primary car battery, a loose audio battery will result in vibrations which will eventually damage the battery itself and consequently the audio system.

Care and Maintenance of the Battery

Ideally, your battery will either require some little maintenance or no maintenance at all. Those that require little maintenance comes in unsealed design where you can add water occasionally before you can eventually replace them.  Those that don’t require maintenance, on the other hand, are completely sealed allowing for only replacements in case of any damage.

Battery Age

Just like other batteries, car audio batteries power units can get damaged if they are not charged for some time. Any battery that has exceeded six months since it was manufactured should be avoided as it is likely that it has lost some power.

Price of the Battery

They are two major divisions of batteries that determine the price tag; wet- cells and dry-cell units. The dry-cell units are more expensive than the wet cell and they serve longer. Wet-cell, on the other hand, is inferior to the dry cell only that they power the stereo system a bit faster when compared to the dry cell.

The Bottom Line

A second audio battery for car audio is a crucial accessory as it relieves the main car battery of the burden of powering your sound system. Picking a durable and high-performing one will assure you of many years of short and long trips with the desired level of entertainment.

Before you settle on any battery for your car audio, you need to look at the kind of battery that is best for your car. It should be a reliable source of power that will deliver optimal performance.

When you roll up the car windows and decide that it’s time to enjoy some good music on the go, all you think about is that sweet bass you are just about to encounter. Your mind starts preparing to get lost in the awesomeness of the kicks delivered by your subs. If you don’t have great subs, however, this is an experience you will only hear about (like the way we are telling you).

Installing a 10-inch subwoofer in your car will completely change the way you listen to music. This car audio component is a must-have for any music lover. This subs are very easy to install and can be fitted in small spaces. Our review this time focused on the best 10 inch subwoofers in 2022 to help you build a stereo system with a decent bass and more sonic clarity.

Our Review Process

So, we armed our review arsenal with the best sound engineering knowledge, installation expertise and experience from real users. This time we were going to hunt for 10-inch subs that have highly competitive quality and performance qualities. As usual, for every unit to be considered for the final countdown, it had to portray a unique ability to perform better than most units.

And so we did what we love doing every day – investigating different car audio equipment supplied by top brands to help you purchase the best and only the best.

Our engineers wore their gloves, installation experts armed themselves with the right tools and real users opened their eyes and ears wide to make sure every sub on the review table was thoroughly investigated.

After a few days of intensive inspection and careful selection, our top editors compiled this list of best 10” subs:

1. Rockford Fosgate P3D4 Overall Best Component Sub

We kick off our review with one of Rockford Fosgate’s best pieces: the P3D4 10″ Punch Subwoofer. It’s quite difficult to beat this brand in many sonic aspects. The P3D4’s power handling is mind-blowing and its eye-catching design assures you that it is a monster when it comes to sound performance.

Rockford Fosgate P3D4-10 Punch Features

• What superior power handling (500w RMS) means for you: Put your P3D4 underuse continuously for hours, even days and it will not blink a second. Its power handling conforms to CEA-2031 standards which means it can handle power continuously without risking damaging the voice coils.
• VAST Technology – louder sound: The sub’s cone is built using the Vertical Attached Surround Technology that increases the cone’s surface area by up to 25%. This allows for more sound production without increasing the size and weight of the speaker
• FlexFit basket: It’s everyone’s wish to have a super-strong speaker that can cope with extreme conditions. This design feature gives you exactly that, plus the advantages of minimized weight and resonance. Quite frankly, this is where the superiority of the Rockford Fosgate P3D4-10 Punch emanates.
• Subwoofer remains cool all the time Previous models of Rockford Fosgate experienced a heating problem which led to the introduction of anodized aluminum cones and dust caps into this new model. In addition, the sub features a unique spider venting that helps to keep the motor cool.

Pros

• Super clear bass
• Very clean bumps
• Quick response time
• Higher RMS than in most subs
• Loud sound when fed with enough power

Cons

• A little expensive but fair for its value
• Requires high power input

Our say:Is deep, loud, and aggressive bass from a powerful and premium quality sub what is in your head right now? The Rockford Fosgate P3D4-10 Punch is your best bet to realize that idea.

Buy the P3D4 without a doubt about excellent sound performance.

2. Pioneer TS-SW2502S4 Shallow-Mount Sub

It’s not easy to find a hard-hitting sub that can fit in a slender enclosure and still deliver the high bass performance you need. This shallow-mount sub will impress you with its powerful performance and premium features, and you’ll be sure to give your car stereo the uplift it needs to sound awesome.

Unique features and benefits of Pioneer TS-SW2502S4

• Oversized, mica injected molded resin cone:The oversized cone is one of the strongest features of this subwoofer. It is able to move more air to deliver louder and more accurate bass than most subwoofers. It enables the speaker to deliver low frequencies that add juicy low frequencies to the car’s audio.
• High-efficiency sound production:The oversized cones work together with double spiders which help to increase power handling and allow for the production of louder bass. The dual spider design allows for more cone motion control and supports the cone’s linear movement for accurate bass response.
• Designed for the best bass in small enclosures and spaces:Pioneer TS-SW2502S4 fits in spaces that conventional subwoofers cannot fit. You can install this shallow-mount sound system in the smallest available space in any type of vehicle thanks to its innovative, space-saving design.
• Highly durable, scratch-resistant enclosure:The sub is wrapped in a sturdy, black carpet that is non-slip and scratch resistant. This wrapping adds more protection to the sub’s interior and also enhances the durability of the driver.

The good

• High sensitivity and energy efficiency
• Reliable continuous power handling
• Delivers accurate bass
• Requires small installation space
• Strong and highly durable materials and sub design

The bad

• Some modifications may be needed to fit the box
• Bass is slightly weaker compared to other high-end subs

Our say: If lack of space is your major hindrance from louder and deeper sound, Pioneer provides a way around this obstacle. The TS-SW2502S4 is a small powerhouse that can give you really low bass frequencies without requiring much space.

Upgrade your car stereo with a 10-inch sub from a reputable brand: buy Pioneer TS-SW2502S4 and you’ll not be disappointed.

3. Pyle PLPW10D 

Pyle serves the market with audio equipment that consistently reinstates its position as the unbeaten leader when it comes to enhancing the quality and sound performance of any audio system. If you are a relentless bass lover, you will be fascinated by the head-turning bass that the PLPW10D 1000-Watt subwoofer delivers.

Features of the Pyle Powerhouse

• You are here for superior sound performance: Pyle PLPW10D gives it out generously. This Power-series sub promises to push your audio to the MAX thanks to its 2” 4-layer high-temp dual voice coil and a 50 oz, heavy-duty magnet. You get the idea…PUNCH! PUNCH! PUNCH!
• Big bass all the wayis what you sign up for when you install the PLPW10D. In addition to the heavy-duty magnet, the sub features a wide, non-fatiguing rubber suspension, non-press cone, and foam-treated surround. These allow for continuous production of deep and strong bass for your total enjoyment.
• Durability at its best: As expected from Pyle, the PLPW10D is a lasting solution to your poor-performance factory speakers. It comes in stamped steep basket housing with bumped and vented motor construction. This housing keeps the sub’s interior safe and undoubtedly extends the unit’s life.
• Best in your car or boat or motorbike: You will rarely find a sub that fits a variety of automobiles like the Pyle PLPW10D. Improved sound performance may be your major target but the versatility of this subwoofer makes it irresistible to many sound lovers, especially those who own a variety of automobiles.

The good

• Pocket-friendly price
• Adds heavy punch to your audio
• Built for durability
• High sensitivity thus good at handling heat
• Impressive versatility

The bad

• Magnet is less robust than in other subs
• May need protective grill in motorbikes and boats

Our say: Whether you want to equip your car, motorcycle, or boat with superior quality sound, this is the most versatile sub you will ever get for that purpose.

Get Pyle PLPW10D on your automobile today and experience MAX power from your audio system.

4. MTX Magnum MB210SP Dual

Is a powered set of 10-inch subwoofers a good addition to your car’s audio system? MTX Magnum MB210SP Dual answers this question by giving you stellar sound performance in an all-in-one package that’s extremely easy to install.

See more attributes of this subwoofer below;

Why choose MTX Magnum MB210SP Dual

• Excellent SPL/Bass on any power: This sub uses a lightweight polypropylene dust cap and large rubber surrounds to deliver the kind of bass that lovers of hip-hop and rap music would die for. In addition, the enclosure is built with a 5/8” MDF (medium-density fiberboard) that can handle excessive bass response continuously without failure.
• Amplifier included:A highly dedicated amplifier designed specifically for the MDF enclosure is included. You don’t need to spend more money on an external amplifier and you certainly will not worry about underpowering your sub.  As you can see, the sub is truly an all-in-one upgrade for your car’s audio system.
• Stylish, heavy-duty sub enclosure and design:The first thing that captivates your eyes is the Magnum logo embroidered in the ported enclosure. You’ll also like the heavy-duty black carpet that ensures the sub doesn’t suffer dents and scratches. This impressive build assures you long-term service. MTX Magnum MB210SP Dual is a reliable sonic upgrade for your system.
• Fine-tuneyour system for maximum sound performance:Even though the amplifier has the capability to push 250 watts to the subwoofers, the subwoofers’ performance can be further enhanced using the built-in low-pass filters and bass boost. Having some control over your system’s performance allows you to achieve the sound that best matches your listening profile if you are a fan of loud music.

Pros

• Drives frequencies as low as 20Hz; implies deeper bass
• Comes with an amplifier
• Stylish design improves car’s interior
• 3-way protection circuitry
• Excellent sound excursion
• Dedicated heat-sink for efficient heat dissipation

Cons

• Power handling lower than other listed subs
• Relatively more expensive
• Some parts aren’t durable

Our view: Adding bass to your vehicle system doesn’t have to be challenging. Install the Magnum MB210SP, one of the best powered 10-inch subs on the market.

Discover the best of MTX Magnum. Check out the MB210SP on Amazon today.                                                                                                                  

5. Rockford Fosgate P300-10 Punch

Rockford Fosgate AGAIN!

Coming in at number 5 is one of Rockford Fosgate’s best pieces: the P300-10 10″ Punch Subwoofer. It comes to the top 5 with really strong bass made possible by the 300-watt amplifier built in a compact design, which also allows it to be mounted in small spaces.

Features and benefits of Rockford Fosgate P300-10 Punch

• All-in-one solution for bass:The custom sealed enclosure harbors everything your car audio system needs to deliver superior quality sound. You are saved from the hustles of installing separate drivers so that all you need is to run power enjoy the bass.
• Powerful performance with the built-in amplifier:Rest assured of magnificent performance from your sub. Its 300W RMS and 600W peak power amplifier work perfectly with all the other system components to give out the best you can get from a 10-inch Rockford.
• Closed-loop design for flawless cooperation of components: You may not know it from the outside but the speaker’s woofer, amplifier and enclose are put together using a clever design called the closed-loop. This is a unique design characteristic of high-end Fosgates and it makes sure each of the components performs at its best.
• No worries about the thermal and electrical safety of your audio system:An unsafe sub can ruin the entire system. Rockford Fosgate really thought about this concern and added thermal overload, short circuit, and overvoltage protection to the P300-10. In case any thermal or electrical problem happens, your sub will continue working and the entire system is protected from damage.
• Other useful features include a built-in bass boost and crossover controls.

Pros

• Excellent sound quality
• Detailed, clear bass output
• Rugged and highly durable enclosure
• Great structural design enables optimum performance
• Can be installed in small spaces
• Easy to install

Cons

• It’s relatively more expensive than most 10-inch subwoofers
• Crossover controls are not easy to use

Our view: The P300-10 impressed the majority of reviewers in our team. It beat most subs in sound quality, engineering and appearance. We are convinced that it’s one of the best 10 inch subwoofers in 2020.

The value you get from the P300-10 surpasses its price by far and this makes it a definite pick.

6. 10W0V3-4 – JL Audio

Featuring superior excursion ability, linearity, and excellent overall performance, JL Audio’s WOV3-4 promises you better sound fidelity and improved sub-bass quality. Set this powerhouse up properly and match it with an appropriate power source to get the well-rounded sound that cannot be obtained by any other sub in its price range.

What to expect from 10W0V3-4 – JL Audio subwoofer

• Reliability and better power handling:JL Audio’s patented Elevated Frame Cooling design coupled with a DMA-optimized motor system and a 2-inch diameter coil make for enhanced power handling. The immediate effect of these features is a significant increase in sound output.
• More usage flexibility and its benefits: You can drive your WOV3 with power as low as 75 Watts but it’s recommended that an amplifier capable of driving between 200 and 300 watts being used. In addition, the sub’s design allows it to be used in a ported or sealed enclosure.
• Striking stability and low distortion:A tight, clean, articulate bass is the result of JL Audio’s DMA optimization. DMA(Dynamic Motor Analysis) enables the motors to remain linear in motor force and maintain a very stable fixed magnetic field over a wide range of excursion and power.
• Excellent speaker durability:The woofer cone is made from a mineral-filled, polypropylene material which helps to mold the subwoofer for durability. The elevated motor design also plays a part in enhancing durability as it allows for more ventilation of the voice coil and reduces the chances of overheating. Thus, wear and tear are greatly minimized.

Pros

• Bass so deep that it sounds like it’s coming from a 12-inch sub
• Well-constructed and easy to install
• Loud, distortion-free bass
• Install it into an enclosure of your choice
• Superior excursion capability

Cons

• Doesn’t come with a grill
• The unit might be too tall for some car models
• A big amp may be needed to utilize it to full capacity

Our verdict: Should you be looking for a subwoofer that is strongly built and one that produces amazing bass, this unit will exceed your expectations

The features and performance of JL Audio 10W0V3-4 are going to blow your mind away.

7. Planet Audio AC10D

If you are looking for a cleaner and tighter sound, look no further than Planet Audio AC10D. It’s among the most powerful 10-inch subs we reviewed as evidenced by its 1500w peak power handling. This compact system easily hides in the quiet spaces of your vehicle but gives out a sound quality that completely defies its size.

Features of Planet Audio AC10D

• Finest for tight bass and precise sound:In addition to having a 1500w maximum power handling capability, the AC10D uses a ring with dual-chamber design and a shared slot port vent. These enable it to deliver the loudest and punchiest bass.
• Compact size for the smallest spaces:The sub sports a compact size, which offers a number of advantages. First, the sub fits in many small locations in your vehicle. Secondly, it is very easy to install. You don’t need any expert knowledge or experience to install it.
• Enjoy your sound just as you love it:The system gives you a number of flexibility features to make sure that you get the best sound quality. These include the input sensitivity selector and low- and high-level inputs. You also get a remote knob to regulate the bass and overall sound from the driver’s seat.
• Foam surround for high excursion:The lightweight surround is ideal for the high excursion. It also helps to keep the cone centered and is self-dampening so your sub won’t sound wooden or make annoying roaring noises.

Pros

• Very high power handling
• High-efficiency cone
• Zero distortion audio
• Relatively affordable
• Well protected against damage due to thermal and voltage upsurge

Cons

• May heat up a little bit during extensive high power performance sessions
• Material not very durable

Verdict: Planet Audio AC10D is a worthy investment into a car stereo for those looking for a quick and easy upgrade from factory sound. It is impressively powerful and comes with a favorable price tag.

Try out this subwoofer and quench your thirst for sound with deep, precise bass.

8. New Rockford Fosgate R2 Ultra Shallow

Is space limiting your music to small, unsatisfying tunes that leave you angrier rather than entertained?

Kill the anger with Rockford Fosgate R2 ultra-shallow subwoofer, a bass powerhouse built with an intuitive structure to handle high power even in small spaces. We inspected the sub’s features and performance abilities.

What makes Rockford Fosgate the best?

• 400 Watts of peak power and 200 Watts of RMS is not windshield-shattering but… You will get loud sounds and strong bass. Even if you install the sub in your trunk, its impressive sound will reach you behind the wheel.
• Amazing sound distribution:Many subs aren’t able to distribute sound well enough. With the New Rockford Fosgate R2, this is a solved problem as it comes with a spider venting feature and 16 AWG tinsel leads that render the sub a great deal of sound distribution ability.
• Add clean, precise bass notes to your music:The R2 ultra-shallow sub from Rockford Fosgate is a worthy effort by the manufacturer to add an extra low-frequency kick to your audio. The 4-ohm voice coils and mica-injected polypropylene cone ensure that the sub gives you deeper bass notes.
• If you are a starter,the R2 is very easy to install.With a mounting depth of only 3.4 inches, the R2 is among the ultra-shallow subs that are painless to install. You will not spend too much time on it nor will you require an expert to have it in.

Pros

• Superior sound distribution
• Highly durable with stamp-cast basket enclosure
• Significantly louder sound than factory speakers
• Deep and clear bass output
• Optimized for sealed enclosures

Cons

• Power handling is relatively lower than other subs
• Highly-priced compared to the majority of listed subs

Verdict: The stress of finding a subwoofer that can deliver superior sound from tight spaces comes to an end with the R2 ultra-shallow sub. You’ll love this compact sub for how hard it beats.

Claim your R2 ultra-shallow sub on Amazon while stock lasts.

9. Sound Storm LOPRO10

You may not have heard much about the Sound Storm Labs (SSL) brand from us. Nevertheless, it appeared in our list of best 10-inch subwoofers 2020 for a reason. At just around $150, the LOPRO10 gives your music that extra punch it needs to provide the juice you have been looking for.

LOPRO10 Unique Features

• They are tiny and impressive: Through our research team, word has reached us that you are looking for small, lightweight, and portable subs. We knew your choice must be a compact and easy-to-install yet high-performance unit. Nothing fitted this bill better than the Sound Storm LOPRO10.
• Easily integrates into your existing audio system:The sound champion is equipped with RCA high- and low-level inputs to ensure that connecting it to other components of your system isn’t a problem. They can be installed in a wide variety of locations and are thus great for quick but reliable sound upgrading.
• Tuning controls give you total freedom over the sound:You have spent hours upon hours searching for the best subwoofer to upgrade your music. The LOPRO10 appreciates your efforts by giving you a sub that allows you to adjust your bass the way you want to hear it.
• Very user-friendly:The LOPRO10 is the only 10-inch subwoofer that came with remote control for bass. This shows the brand’s dedication to making it easy to use and convenient for everyone.

Pros

• Very user-friendly; remote control system
• Sound control abilities
• Bass boost for a more punchy sound
• Can be installed in a wide variety of positions
• Thermal and short-circuiting protection

Cons

• Lesser power compared to bigger subs
• Not easy to obtain optimum sound using a control system

Verdict: The LOPRO10 offers unique goodies like a remote control. It is super-compact and you can adjust your music accordingly. With the impressive sound quality it delivers, the sub is something worth checking out.

Looking for a super-compact subwoofer that’s favorably priced? The LOPRO10 won’t disappoint.

10. JBL S2-1024SS

Until the JBL S2-1024SSwas brought to the review table, we weren’t fast enough to consider box design as a very crucial feature. But the way JBL has married subwoofer performance and box design in the S2-1024SS model granted the sub a position in the top 10-inch subwoofers list.

Why choose JBL S2-1024SS

• Oversized voice coil:Ever seen those not-so-big boxers that advance heavyweight punches at their opponents? In the world of subwoofers, the S2-1024SS is the small guy with a heavy punch thanks to its oversized voice coil. The coil can handle more power than normal voice coils.
• Switchbetween 2-ohm and 4-ohm impedance: In the future, you may want to optimize the sub to your audio system. JBL’s Selectable Smart Impedance feature allows you to switch between the two impedance levels so that you can add another enclosure later without needing to replace your bass amp.
• Reduced port noise and distortion:The S2-1024 comes with JBL’s patented Slipstream port that uses a double-flared design. The main aim of this design is to give you more boom with less turbulence. It also allows for the construction of a small enclosure without sacrificing impact.
• Durability:One of the things that have made JBL Series II a big hit to date is the quality build that characterizes every model in that series. The S2-1024 isn’t an exception; it uses a polypropylene cone and rubber surround that will stand up to any performance situation throughout the long life of the sub.

Pros

• No noise or turbulence
• Exceptionally loud sound
• Highly durable parts
• Switchable impedance
• High flexibility

Cons

• Requires advanced installation skills
• Takes more space than other smaller subs

Verdict:JBL has added quite intuitive features in this 1000 watts RMS 250 watts peak power subwoofer. It is the best option for a forward-thinking sound enthusiast.

Bass: Tick! Power: Tick! Flexibility: Tick! Durability: Tick! This is great value for your money.

What to Look for When Buying a 10-inch Subwoofer

Choosing a 10-inch subwoofer isn’t a complicated process. It’s basically a 3-step process in which:

1. You identify the aspects that you need to check
2. Award each subwoofer marks based on how it performs in a particular aspect
3. Add up the scores.

And…Voila!

You’ve got a winner.

But you’ll also make special considerations based on your preferences. For instance, if the bass output is top on your priority list, then you will not shy from picking the most powerful speaker (based on power handling capability) even if it might be high priced.

Let’s get down to what you should look for when buying a 10-inch sub.

1. Power Handling

Subwoofers are built for the bass, and we can’t live without the bass. That’s why being keen on a speaker’s power handling is very crucial. Essentially, you will look at the RMS and peak power (MAX) rating.

You can rely more on RMS as some manufacturers exaggerate MAX power. The higher the RMS rating, the more powerful the sub is. But don’t also forget that your stereo system has an amp. So, choose a sub whose power handling matches that of the amp to achieve better sound quality.

2. Sensitivity

A speaker can have high power handling capability but still fail to produce great sound as expected. Often, it’s because of low sensitivity, which is the speaker’s efficiency to convert power to sound.

To achieve better sound at all volumes, you need a sub with high sensitivity. Select subs with a sensitivity rating between 80 and 100 decibels.

3. Does the Speaker Have Single or Dual Voice Coils?

The voice coil component produces sound by pressing and pulling the subwoofer cone repeatedly. The majority of subs on the market have either one voice coil or two separate coils connected to the cone.

You said you are after the bass; go for dual voice coils (indicated as DVC). DVC subs are preferred by bass enthusiasts because you can connect both loops in parallel to achieve maximum bass output.

4. Enclosure type – Determines the Type of Bass

If you pick a subwoofer at random today, you’ll find that it either has a vented enclosure or a sealed ring. What you pick depends on the type of bass you want.

Vented enclosures are for higher volumes while a sealed ring delivers deeper bass.

5. Cone Size and Material

In sound reproduction, the surface area of the cone is a critical factor for the loudness achieved. Larger cones or cones with special extendable design features (for example the VAST technology) are the best. Don’t forget to choose the best cone material too.

Other important factors include:

• Speaker’s size versus installation space requirements
• Price – working with a budget makes selection a whole lot easier

With a clear knowledge of what to look for when evaluating every 10-inch subwoofer, you can now go-ahead to give the speakers a score and finally choose the one you think satisfies your requirements and preferences.

10-Inch Subwoofers: Frequently Asked Questions

Q: Which is better – single or dual voice coil 10-inch subwoofer?

A:Choosing between a single voice coil (SVC) and dual voice coil (DVC) sub is an issue of flexibility, not of which sub performs better. If you want to build your audio system and take full advantage of the amplifier, a DVC sub is the better choice. A DVC provides multiple impedance connections that allow you to better match the available amplifier impedance options. You can maximize the power available from the amp using a DVC sub, which isn’t possible with an SVC sub. Also, with a DVC you can add other amps or subs to the system in the future.

Q: Why does cone material matter?

A:Common materials for subwoofer cones include treated paper, synthetics such as polypropylene, and composites like injection-molded quartz and aluminum. Paper is lightweight. It responds quicker compared to other materials. To enhance the durability of the cone, manufacturers coat the paper with a layer of carbon fiber, polyglass, Kevlar, or CSX. All said and done, treated paper is less durable than other materials.

Polypropylene is lightweight but more rigid than paper. Manufacturers find it easy to work with, which is why it is the most common cone material. Polypropylene adds more protection to your cone against moisture, mold, and mildew. It has a small influence on the quality of sound.

Metals such as aluminum and magnesium are also popular options for cone material. They are more rigid, and this makes them ideal for bigger subs. Metal cones are highly durable.

Q: How much power does my 10-inch sub need?

A:Each sub has a recommended power range. Check the RMS rating listed in the sub’s specifications. The lower number in the range is the minimum amount of wattage the sub needs to deliver. Moving toward the bigger number means the sub receives more power. Bass notes are generally more power-hungry. Subs deliver louder and punchier sound when coupled with an amplifier that has RMS ratings in the upper end of the sub’s power range.

There is no problem with your amp’s RMS output exceeding the sub’s maximum RMS output. You just have to ensure that you don’t turn up the volume knob too high to damage the speaker.

Q: What kind of enclosure should I get for my 10-inch sub—ported, sealed, or bandpass?

A:There are three main types of subwoofer enclosures – ported, sealed, and bandpass. Whichever type you choose, make sure that the box is tightly constructed for optimum subwoofer performance

If you are looking for deep, precise bass, go for sealed boxes. Sealed enclosures are the best for deep bass extension and power handling. However, they need more power than ported boxes

Ported enclosures are perfect for forceful bass. They provide deeper bass than sealed boxes at any amplifier wattage and are thus loved by fans of rock, heavy metal, and any other hard-driving music.

Bandpass boxes are designed for a maximum slam. They produce extra loud sounds with a narrow frequency range. Their aggressive sound is suitable for reggae, rap, and hard-rock.

Q: Which is the best 10-inch sub for my truck or pickups?

A:Small, compact, and enclosed subs are always good for trucks. You can find an enclosed sub that can fit in your truck’s interior. It always helps to measure the clearances in your vehicle to know for sure if a sub and its enclosure will fit.

Q: Must I install an aftermarket stereo to use with my new sub?

A:Hooking up an aftermarket stereo with a 10-inch sub means you will get cleaner sound with or without an amplifier. You can also use the sub with a factory system and an amplifier. Whichever stereo system you have, you will need to make wire connections to get to the high-level signal the stereo puts out. Then, you can use a line output converter to lower the strength of the signal before sending it to the amp.

Rockford Fosgate P3D4 is Our Winner

We settled on the P3D4 as the best 10-inch subwoofer of 2020 because it ticked yes to the most important factors one should consider when choosing the best sub.

This speaker has superior power handling which enables it to drive more power through the system. It achieved a loud sound that was impressively clean and had deep and accurate bass. The speaker also features VAST cone technology and FlexFit basket design top-notch design to support its high-performance demands.

Are you looking for an amplifier that can adequately power your subs for a better in-car entertainment experience?

You can bet on Rockford Fosgate R1200-1D Prime to bring back life to your in-car entertainment. This review will help you evaluate crucial features of the amplifier as well as its pros and cons.

Rockford Fosgate R1200-1D is a highly efficient mono amplifier with features and abilities that significantly enhance car audio volume and quality. This class D amp is compact and thus a perfect fit for all types of vehicles – from large trucks with massive storage space to small sport cars that are short of space. Its unique features include MOSFET power supply, RCA pass-thru outputs, 4-gauge power/ground connectors, 12dB/octave Butterworth crossover, infrasonic filter, and power supply thermal sensing.

Features of Rockford Fosgate R1200-1D Prime Amplifier

High power output with MOSFET power supply

The best description of this Rockford Fosgate amplifier is ‘massive power in a tiny package’. It totally overshadows any sound system around.

This amp responds quickly to peak demands thrown at the audio system. It can produce 1200 watts into a 1-ohm load without overloading the electrical system. This power capability means that the amp can crank out about 1200 RMS when running on 1-ohm sub setup.

The amp uses MOSFET (Metal Oxide Semiconductor Field Effect Transistor) power supply, which provides greater power efficiency. MOSFETs operate at lower power and draw no current from the audio system. Besides, they are associated with high input impedance, which allows for quick and flawless switching from high to low power demands. MOSFET power supply assures you steady hard saturation. It is highly reliable for high current application.

Class D circuitry

Class D amps deliver more than you’d expect from other classes of amplifiers, namely class A and class B. In addition to giving you clearer and less distorted sound, the amp allows more flexibility regarding the types of music you can enjoy.

This Class D Rockford Fosgate mono amp packs more power per square inch, the reason it takes up significantly less space than other amp offering equal power. Also, this powerful amp features a new design that’s smaller and sleeker.

Regardless of the size of your vehicle, storage space for this amp should not be a concern. It can fit in tight setups of super small cars. Why go for outdated large, heavy, and bulky amps while you can enjoy better sound performance with this modern, space-efficient class D mono amp?

20 Hz – 250 Hz frequency

Such an impressive frequency range tells you at least one thing: that the amplifier is a great stereo companion for a wide range of car audio parts. Many users love how well the amp works with subs to produce smooth, harder bass. Moreover, it works seamlessly with other speakers for reproduction of higher frequencies.

Low pass subsonic filters, 12dB octave low pass, and high pass patented crossover

Enjoy fingertip control over your subs with the remote punch bass boost and patented crossover.

Rockford Fosgate R1200-1D gives you more control over audio settings than most amps can. It allows you to listen to your favorite jams the way you want. An infrasonic filter is installed to prevent ultra-low bass notes from damaging your subs.

With the On-board Punch EQ with +18dB punch boost, you can make the audio system run very loud (up to forty-five HZ). Even at the highest volumes, you won’t hear any vibrations or distortion of sound or frequencies.

Use the remote bass level control to set the system from the driver’s seat so that it delivers more bass where you want it. Mix and tweak various audio settings to customize your listening experience. Enjoy the convenience that these control features offer.

Solid, durable, lightweight cast aluminum build

Rockford Fosgate has used cast aluminum to make the body of this powerful amp. Furthermore, the manufacturer has placed a stealthy top control panel for increased durability. This sturdy built reinstates Rockford Fosgate’s commitment to quality. And as an assurance for this, the company has attached a 1-year warranty on the amp when purchased from an authorized reseller.

Compliance with CEA 2006

CEA 2006 is a rating standard that makes it easy to compare the performance of amplifiers. Rockford Fosgate R1200-1D has a CEA logo, an indication that its specifications are accurate. According to CEA 2006, the most significant indicators of the performance of an amplifier are Signal-to-Noise ratio and Output Power. You can reliably evaluate fundamental qualities of the R1200-1D, such as the loudness and crispness of sound, as you search for the best amp for your car audio system.

Tri-stage Power

If you love turning the bass all the way up, you need an amp with some sought of protection against overvoltage, short circuiting, and thermal problems. Rockford Fosgate has taken care of this by using a tri-stage power production system. In fact, power supply thermal sensing is one of the major selling points of this amp. You have less to worry about current overload or overheating issues common to many amplifiers.

Pros

• It is one of Rockford Fosgate’s most powerful amps
• Super loud and distortion-free sound
• Modern, compact, space-saving design
• Fine-tuning abilities improve overall sound quality
• Highly durable build material
• Class-D circuitry offers more versatility
• Protects system against current overload and short circuiting

Cons

• Gets a bit hot
• Some customers experienced problems with the amplifier cutting out

Our verdict

There are many things to like about this mono amp. First, you can use it with low-to-mid frequency speakers for cleaner, louder, and smoother sound. It’s powerful, efficient, and durable. Without a doubt, Rockford Fosgate has marveled in combining Class-D circuitry with highly efficient sound customization features. You should expect nothing less than rich, distortion-free, full bass sound delivery after installing this amplifier.

In addition, the amp provides unmatched versatility (in terms of the types of music that you can listen). Perhaps, this is what the typical Rockford Fosgate amp delivers. The company is a popular leader in the car speakers and amplifiers market.

The amp’s lightweight and compact design makes it a perfect choice for all types of cars as it can fit into the tightest setups. It is easy to install and can easily fit under the seat.

Our analysis of customer reviews shows that the majority of users gave this amp a 5-star rating. The customers feel that amp beats out the competition at the current price.

So you’ve been searching for ideal car audio speakers to replace your old burned-factory units? Get yourself Rockford R169X2 speakers with a powerful performance at an affordable price. These are excellent factory speakers designed for drivers and outdoor entertainers who like rocking their rides with great music. They’ll ensure you your friends gets nothing but the best of quality sound reproduction.

These are 2-way speaker components and sounds great just like their 3-way counterparts. Rockford R169X2 are designed with durable and stiff components that guarantee better performance for your car audio system. They come in a pair of two, with each speaker unit featuring a stiff polypropylene woofer with strong drums and base. They are easy to install and fits perfectly in most cars’ doors, as long as the door openings are 6×9 inches. This is the standard door speaker opening for most passenger cars. Let’s look at their specifications.

Product Specifications

• 6×9 2-way speakers
• Frequency response- 48-20,000 Hz
• Top mount depth- 2-15/16 inches
• Power range: 2-65 watts RMS (130 watts peak power)
• Sensitivity: 90 dB
• Impedance-4 ohms
• Power Handling: – Peak: 260 watts per pair / 130 watts each
• RMS: 130 watts per pair / 65 watts each

Who are the speakers designed for?

• Vehicle owners and operators
• Outdoor entertainers
• Gamers

Product Features of Rockford R169X2

Vacuum-formed Polypropylene Woofer Cone

Each 6″x9″ speaker features propylene woofer cone that provides strong drums and bass. The woofer cone is also responsible for the reproduction of excellent midrange frequencies. This provides quality punchy sound featuring quick transitions from bit to bit. Rockford Fosgate R169X2 comes with a woofer mounted together with the tweeter hence making it fit in more cars and adding that excitement of high-frequency speaker response. With the built-in crossover network, the frequencies are divided according to each driver they are assigned to. These speakers feature a shallow mounting depth and a wide frequency response that ensures high-quality sound production.

Sleek and Flat-black Design with Glossy Dome Tweeters

Rockford Fosgate Prime series of car audio speakers features a sleek and flat-black designing with glossy dome tweeters. The silk-dome tweeter flush is mounted to the woofer thus ensuring that it fits in more cars, adding an excitement of a strong frequency response. The tweeters are designed in such a way that they allow the speaker to easily fit in various locations and give a focused image. The Rockford Fosgate’s Prime Series R169X2 speakers adopt a shallow mounting depth and a wide frequency response, which allows for easy fitment for maximum performance on any type of car in the market today.

Strong ABS grilles and Mounting Hardware

If you’ve ever owned an ABS grille integrated speaker,

 then you can easily understand their great durability and aesthetic designing. Acrylonitrile Butadiene Styrene (ABS) is a thermoplastic that is ideal for industrial and marine applications. With the ABS grilles, the R169X2 offers you the opportunity to add a stylish design to your vehicle’s interior decoration. Use these speakers to customize your car’s cabin for unmatched aesthetic beauty.

Stamped Steel Basket Frame

Rockford R169X2 speakers are fitted with stamped stainless steel basket. The baskets are rustproof and ideal for marine conditions. The speakers are however not marine certified for usage in vessels such as boats. Stainless steel designing makes them ideal for both indoor and outdoor usage. Yes, they are good for outdoor entertainment.

Stainless steel materials are not only proffered due to its corrosion resistance but also high and low-temperature resistance. This means that these speakers are capable of surviving extreme weather conditions including elevated temperatures and pressures. Other advantages of stainless steel include aesthetic appeal it adds to the speaker design the hardening properties.

• Easy to install
• Features stainless steel basket designing for durability
• Does not require an amplifier to operate
• Highly durable polymer composite rubber surrounding cone
• The overall audio quality is good

What I Don’t Like

• The speakers are not marine certified
• They are not waterproof
• Does not fit in all the latest car designs
• Low power handling ratings

Can these speakers be connected to an amp?

Yes, you can connect Rockford R169X2 speakers to an amp with a rating of 75RMS per channel. However, you don’t necessarily require an amp as long as you have a decent head unit or receiver. Yes, they’ll work perfectly even without an amplifier, though many prefer an amp to boost the overall performance of the car’s audio system.

Are they water Proof?

Unfortunately no. However, they are designed with a stainless high-strength steel basket that is capable of withstanding extreme temperature conditions.

What is the speaker’s input impedance?

The input impedance for each the speaker unit is 4 ohms. Considering that the system comes in a pair of 2 units, the total impedance amount to 8 ohms.

Verdict

Generally, Rockford R169X2 speakers sound great and feature a fantastic durable designing. Their feature very few only setback is the low-power handling ratings that may not go well with listeners who likes turning it up. Otherwise, whether you’re installing them as your first speaker system in your vehicle or replacing the burnt out factory speaker sound system, they’ll get the job done for you. They provide your car’s interior with an aesthetic and luxurious feel while giving life to your favorite tones during your cool rides.

Be sure to provide yourself and friends a great entertainment using that will keep you rocking throughout your ride. Rockford Fosgate R169X2 car’s sound system speakers. The speaker unit is primarily built for car’s factory door replacement. However, their usage can be extended to outdoor entertainment operations such as parties. Although they don’t fit in all car doors, they can be made to fit using various car design technologies. As long as you have a perfect head unit in your car, you’re good to go. Consider R169X2 is 6″ x 9″ 2-Way speakers from Rockford Fosgate for your vehicle’s next audio system upgrade.

Is your vehicle’s sound system operating with the old- fashioned speakers? It’s high time you upgrade the old factory speakers to new units with high performance. Kenwood KFC-1665S 6×9″ 400W 3-Way Car Speakers are designed for both the young and the old generation who want to rock their rides with great music. The speakers are capable of handling 400 watts of MAX power and 45 watts of RMS power to provide you with the ultimate sound reproduction you’ve been yearning for.

See Also: Atoto A6 Speakers

Kenwood speakers are fabulous speakers and they are known worldwide in the field of car audio system. If you’ve ever owned a Kenwood speaker unit then you’re in a better position to understand the impressive nature of these speakers. Thanks to the rugged materials that allows them to endure the extreme weather conditions hence making them ideal outdoor speakers. These black colored speakers appear very beautifully designed magnets woofers. The various components have been brought together in a unique style. The various drivers and twitters are installed in a single component. This helps in saving time and money.​

Product Specifications

• 6″ x 9″ 3-way speakers
• Frequency Response-35 Hz – 22k Hz
• ​Mounting Depth- 1-11/16 inches
• ​Sensitivity: 92 dB
• ​Power Handling -Nominal Output Power-45 Watt
• Max (RMS) Output Power- 400 Watt
• Frequency Response – 30 Hz – 22k Hz
• Nominal Impedance-4 Ohm
• Connectivity -wired
• Detachable Grilles-Yes
• Cutout Diameter: 4-7/8inch
• Amplification Type- passive

Who are they designed for:

• Car owners
• Outdoor Entertainers

Features of the Kenwood KFC-1665S

Water-Resistant Diamond Array Pattern

The KFC-1665S 6×9″ 400W 3-Way speakers from Kenwood features a water-resistant diamond array pattern. This increases the speaker’s strength while improving the base response and reducing internal vibrations among other distortions. With the water resistance, these speakers are ideal for outdoor entertainment use. They are however not marine certified hence may not be suitable for use in water vessels such as ships and boats.

Propylene woofer cones and balanced Paper Tweeters

These are 3-way speakers, hence you should expect 2-inch polyetherimide cone tweeter, 1/2 inch ceramic super-tweeter and propylene cone woofers. This combination ensures emission of high-quality sound at low frequencies. The speaker comes with a strong urethane surround that is extremely lightweight hence increasing the speaker efficiency. The woofer cones are made of a specific high-quality clothing which helps in reducing clothing. The cloth surrounding improves the efficiency for maximum sound output at the minimum input. The injected polypropylene cone is ideal for creating mid-range and mid-bass response.

Steel basket

The car speakers are surrounded by steel baskets. The black Steel basket is responsible for canceling any unwanted noise hence reducing sound distortion. So, you get quality music reproduction with a better base from Kenwood KFC-1665S 6″x 9″ 400W 3-Way Car Speakers. Steel is also known for its durability and so you can be sure you’ll be getting a long-lasting speaker for your vehicle.

Durable Designing featuring High strength grilles and aluminum coil

The speakers feature a variety of pretty grilles for protecting the various objects and components. The grilles contribute the speaker’s stiffness making it hard to wear and tear. The sharp-looking grilles are added an impressive appearance just in case you’re looking to do a customized audio system installation in your car. The voice coils adopt aluminum material that is capable of withstanding high temperatures hence making them ideal for providing effective performance for several years.

Perfect impedance Matching

For quality music reproduction, it is important that any speaker system features all the drivers plus all other components in such a manner that impedance is always matched every time. It is also important for the system to add suitable amplifiers for sound boosting purposes. Kenwood’s KFC-1665S Car Speakers coaxial speakers have a low impedance value that matches with the various amplifiers and drivers to give you that sensational music you’ve been yearning for. The speakers are designed using Kenwood’s Image Enhancer 4 technology and Counter Drive Magnetic Circuit to ensure phantom center channel imaging and low sound distortion.

[su_list icon=”icon: thumbs-up” icon_color=”#00BF08″]

• Quality Sound Reproduction
• Durable Design with pretty grilles and aluminum coil
• Lightweight- They weighs just 4 pounds hence making them lightweight for easy portability
• The speakers comes in elegantly small making them simple to install on the dashboard, door and other locations of your car
• The tweeter delivers smooth highs
• Affordable
• Water-resistant design

[/su_list]

 

What I Don’t Like

[su_list icon=”icon: thumbs-down” icon_color=”#BF000A”]

• Low-frequency response
• The tweeter lack sharp details
• Sound distortion- vibration and other bad noise affect the overall performance when the speaker are played too loud
• Difficulty in installation- There is a specific driver combo in front of the speakers for controlling the pattern, which may be difficult to install

[/su_list]

Frequently Asked Questions

Which car models are these speakers best it for?

I would recommend that you check crutchfield.com fitment guide to check on the speaker size that your vehicle requires. KFC-1665S 3-way coaxial speakers will perfectly fit in any car with 6.9- inch enclosure/ door pod.

Do I need additional tools to install them?

It all depends on the vehicle you’re intending to install them on. Some vehicles are just good to go while others require an adapter. However, generally, installation of these speakers is simple with spade connections that you just slice into the car’s outlets.

Do they include grills?

Yes, the speakers include high strength grills designed with an aesthetic feel to enhance the beauty of your car’s cabin. The grilles also protect the various speaker components hence enhancing its durability.

See More Questions and Answers

Verdict

Generally, Kenwood KFC-1665S Car Speakers offers impressive sound when properly tuned. Despite the few cons, it is an awesome car audio system speaker for rocking your rides. The low-frequency response is just okay, and for those who prefers a bunchy base may opt for separate sub-woofers. The sharp details balance the smooth highs so the final sound produced is great and soft for your ears. Just like many speakers out there, the sound distortion due to too loud playing is normal.

Read Also: Pioneer TS-A6966R Review

Nothing gives you, together with your friends an ultimate entertainment like KFC-1665S 6×9″ 400W 3-Way speakers. The speakers give you the best you’ve been yearning for. Upgrade your car door speaker system today and get the best of it as you cruise down the road. This model features lots of innovative qualities and features, which makes it an ideal car audio speaker system. Please note that Kenwood’s 3-way KFC-1665Ss coaxial speakers are sold in a pair alongside a pair of Kenwood KFC-1665S Sports Series 6-1/2″ 2-way speakers.

Most OEM car speakers that come with your car are mostly made from low-grade components and inexpensive materials that meant to bring down the costs of production with acceptable performance.  In your factory car speakers, you will find steel, compressed paper, and other sub-standard materials.

Improving your car’s audio system is one of the best ways of enhancing its value. Also, it is an ideal way of enjoying your ride on a whole new level. Replacing factory speakers with the best 5×7 speakers will provide more abundant, louder, and fuller sound to meet all your needs.

5×7 speakers are popular aftermarket speakers, and they not only offer quality sound but also they’ll distort less, last longer and handle enough power. All you need to do is to pair them with the best car stereo and a good amplifier, and you will find yourself enjoying your favorite tunes. You will still note the difference even without adding an amplifier.

Most 5×7 speakers have a multiple-hole pattern that allows them to fit even on the 6×8 openings. This size fits in most vehicles, and they can be mounted anywhere. We have provided you with six best speakers of this segment on the market that offer true quality at reasonable prices.

Good music is a perfect way of adding a lively touch to everyone. It is especially important during long travel stuff. Having the type of speaker that matches your needs and that of your car will create a lot of difference. With that in mind, we will guide you on the best 5×7 speakers and how to pick the one that will suit your car.

How we picked top 5×7 speakers

Shopping for the best 5×7 speaker version for your car can be mind-boggling. This is a huge concern because the market is filled with sub-quality brands claiming to be the best. We are here not to deepen the concern but to offer a solid solution so that you can make an informed buying decision.

During our research, we focused on quality to ensure that we provided you with speakers that offer actual value for the price. We narrowed down to six top 5×7 speaker brands under $100, and we believe that they are going to enhance your listening experience.

1. Rockford Fosgate P1572 Punch – Overall Best for 2020

P1572 Punch has been designed for audio enthusiasts in need of a quality factory replacement. The flex fit basket ensures compatibility with factory speakers’ mounting slots. Also, it harbors responsive components for impressive sound and bass performance.  Besides, it can handle an impressive amount of power on a continuous basis, meaning that it will make the best out of any jam that goes through it.

Rockford Fosgate P1572 Punch Features and Benefits

• Speaker’s Design: Punch P1572 is a little bit oval, which is unique and pretty to the eyes. Also, it has a Flex Fit basket design which ensures that you can slightly adjust your speaker after installation for a better fit. This basket also utilizes unique slots instead of the typical screw holes which ensure compatibility with factory speaker locations.
• Strong Cone and Rubber Surrounding: The speaker’s mineral filled, and injection molded cone that is made of polypropylene which is lightweight and rigid thus making this speaker very durable. Also, the speaker is protected against any shock by the Butyl rubber surrounding. This construction helps to minimize any cone flex during extended use, which helps to improve overall sound quality.
• Integrated Crossover and Built-in PEI Tweeter: P1572 harbors an Integrated Concealed Crossover with an inbuilt PEI tweeter inside the basket. The crossover is hidden, which creates a tidy look, and also it facilitates easy installation. This also means that you do need to install the tweeters separately. Also, this arrangement ensures that the correct frequencies are sent to the right drivers for maximum protection and high volume output.
• Efficiency: Rockford Fosgate-P1572 is highly efficient as it can handle 60 watts continuously basis and a sensitivity rating of 89dB. This translates to good sound quality with perfect clarity, and there is no doubt this speaker performs it best. Also, the VAST attachment gives this speaker more effective cone radiating area.

What we liked

• Perfect size that is easy to install.
• You can adjust the speaker after mounting using the flex fit basket.
• Comes with PEI tweeter and built-in crossover.
• It offers excellent sound quality and fuller bass.
• The polypropylene cone can withstand continuous use.

What we didn’t like

• Some may not like the oval design.
• It can distort at high volume levels.

Our Verdict: P1572 is committed to sonic excellence, which is experienced through the powerful music that it reproduces. It delivers an impressive sound that will stand out from the rest thanks to its punch components.

You’ll like the balance and quality of sound you receive.

2. Infinity REF8622CFX

The Infinity REF8622CFX delivers incredible sound space such as smooth highs, and deep lows thanks to the high-grade components. It is extremely lightweight and provides good quality music without distortion. They will fit in most cars, and the good thing is that they will fit in 6×8 mounting slots.  Their unmatched sound quality, exceptional compatibility, and sleek construction is what informed in picking REF8622CFX as the runners-up.

Infinity REF8622CFX Features and Benefits

• Smart Woofer Design: To begin with, REF8622CFX features a sturdy polypropylene woofer which offers big sound space which includes deep lows and smooth highs. This design also facilitates enhanced bass output and improved midrange performance. Its durable hi-roll rubber surround ensures maximum protection of the inner structure while also delivering reliable performance from a speaker this size.
• It is all about the Details: These speakers offer exceptional clarity thanks to the edge-driven textile tweeters that’s brings out all the details without any distortion. The tweeters provide smooth and clear highs resulting in non-fatiguing sound even at high volume levels. The tweeter output level control allows for frequency optimization depending on the listener’s preference or installation location.
• Optimized Frame Size: Infinity REF8622CFX comes in a sleek, compact design that allows it to fit easily in any car.  This will also result in accurate music reproduction. The copper accents on the cone area give them a great look, adding to the interior of the vehicle. Besides, these speakers come with bass blockers, so you don’t have to purchase them separately if you need to use them.
• Works with any Power Supply: These speakers can handle up to 60 watts continuous power, which means that they will work well with any car stereo, aftermarket, or factory. The speaker’s 3 ohm impedance rating combines with that speaker wire so that you end up with 4 ohm for more sound production. Plus, it is incredibly lightweight and it will fit in most factory speaker locations, including the 6×8 openings.

What we liked

• REF8622CFX has excellent distortion control at max volume.
• 360 watts output for maximum efficiency.
• Inbuilt textiles tweeters for lots of detail in your sound.
• It includes bass blockers.
• It features a lightweight design

What we didn’t like

• It tends to strain at low frequencies.
• It does not include mounting grilles.

Our Verdict: REF8622CFX uses state of the art technology to deliver an audio experience like no other no matter where you install them. It will serve as a practical upgrade, especially if you want to listen to music at a louder but crispier volume.

Hear all the details that you have been missing in your music with the amazing Infinity REF8622CFX.

3. Polk Audio DB572 DB+ Series

Functionality is what defines DB572 from one of the most reputable audio company in the world. The construction starts with a laser-imaged design that ensures a smooth response and minimal distortion. The inbuilt crossover ensures a seamless flow of high and low frequencies for efficient audio production.  It works well with both OEM sound systems and high powered aftermarket systems although it is not the prettiest design out there.

Polk Audio DB572 Features and Benefits

• Marine Certified: The functionality of Polk Audio DB572 goes beyond sound quality, as it IP55 rated, meaning that it is resistant to water and dirt. This makes it appropriate for use in boats and ATVs. A part of this marine certification also includes tests for UV, salt water, and humidity. It also comes with stainless steel mounting hardware that is fully guarded against those elements.
• Universal Fit: DB572 allows you to get back to other important things as it involves a simple drop-in installation and it can be fitted in any vehicle including boats. This ensures faster installation with great sound to enliven your moods. Other than this, it features premium materials that deliver a signature sound that is incomparable to that of OEM factory systems.
• High-Performance Upgrade: The best thing about DB572 is the 3/4″ silk dome tweeters which make use of a neodymium magnet to deliver accurate high-frequency reproduction. This ensures that you are enveloped in great musical detail. The built-in crossover ensures the low and high frequencies are directed to the correct drivers for seamless audio.
• Tremendous Power Handling Capacity: Polk Audio DB572 features one of the best power handling capability as it can handle up to 75 watts RMS power. It also has a very high sensitivity rating of 92dB, and this is the prime criterion that leads many users to love this product.  Also, its laser-image design ensures a smooth response with incredible sonic detail and minimal distortion.

What we liked

• Marine certified for use in boats.
• Multi-hole mounting design for easy installation.
• It has one of the highest sensitivity rating of 92 dB.
• Universal compatibility; integrate seamlessly.
• Great audio quality that goes beyond OEM factory systems.

What we didn’t like

• Lack of a mounting grille exposes the speaker to damage.
• Power is a bit low, so the speaker will not be very loud.

Our Verdict: Polk Audio DB572 will keep on rolling, and with marine certification, you can use it on your boat or ATVs. It is an ideal choice for expanding and upgrading your aftermarket stereo system.

With Polk expect nothing less of a high- quality set with great quality components.

4. JBL Club 8620

This Club JBL series has a low profile which allows it to fit in both small and big vehicles. It is designed to deliver smooth and clear high frequencies while withstanding unfavorable car conditions. Also, it features a high sensitive design that allows you to hear all the musical details that have remained hidden behind your factory speaker.

JBL Club 8620 Features and Benefits

• Plus One  Woofer Cone Construction: JBL CLUB-8620 has employed JBL’s patented Plus One technology that works to extend the cone surface area to give you improved midbass performance, exceeding that of other speakers of similar size. Additionally, it includes edge-driven PEI tweeters which expand the frequency range to enable you to hear the musical details that you have been missing.
• Perfect Match for any Stereo: Club 8620 has been designed to draw more and more power from any car stereo to give your music a classical touch. You can connect your speakers to an outboard amplifier to get even better results. With this, you can play all your favorite jams without distortion. You will also be pleased to know that this speaker is extremely powerful with a sensitivity rating of 89.5dB and 55 RMS power.
• Well-rounded Speaker for Stellar Performance: These coaxial speakers feature high-grade components that include the UV-resistant polypropylene woofers for impeccable performance even under chilliest weather conditions. The result of this is a great musical output that is characterized by high sensitivity and increased low-frequency output. In addition, the woofer is designed to produce non-resonant sound while withstanding the car’s unfavorable environment.
• Solid Construction: Each speaker in the pair features a very shallow tweeter design which ensures zero tweeter projection. This ensures that the mounting grille sits flush for a seamless look. The high-grade materials used in its construction ensure that you get a stereo system that will serve you much longer. The outer surround completely blocks dirt from entering the speaker, which helps to minimize speaker wearing.

What we liked

• High sensitivity design.
• The low profile allows it to fit many vehicles.
• UV-resistant for great performance even under unfavorable conditions.
• Provides smooth and clear high frequencies.
• Great sound clarity.

What we didn’t like

• It does not come with grilles, so you need to buy aftermarket grilles.
• Bass performance could be improved.
• Power efficiency is not as great.

Our Verdict: JBL Club 8620 is here to make sure you get nothing less of quality, and it is well-built to say the least. For better results, you can hook them to an amplifier, and you will have your favorite tracks coming your way without any distortion.

Having a set of JBL Club 8620 will set your car apart from the rest.

5. Pyle PL573BL

Pyle PL573BL is a great plug and play speaker replacement for your car stereo system. It comes with the mounting hardware, grilles, and wires to ensure an effortless installation. It is built to increase the efficiency of heavy play time, and you will hear the difference right away. They are built with inexpensive but good quality material to help minimize the cost of production.

Pyle PL573BL Features and Benefits

• Non-fatiguing Butyl Rubber Surround: Pyle PL573BL has carefully combined high performing components embedded in a non-fatiguing rubber surround that helps to keep your speakers safe, extending its life span. It also features 1’ ASV voice coil which produces clear sound with superb responsiveness. It also provides an open sound stage that is free from distortion.
• Fuller and Enhanced Sound-Stage: The Poly injected cones found in this speaker will provide you with fuller and a warm natural sound. This natural sound will roll seamlessly into the airwaves as soft frequencies via the tweeter. The sound is enhanced further by the second tweeter, which introduces an outstanding high-frequency spectrum that is blended into the sound stage.
• Effective Magnetic Motor Structure: The motor is designed with a 20 oz. neodymium magnet that enables it to produce frequencies up to 20,000 Hz, about the maximum rate that a human ear can bear. The structure also provides up to 300 watts peak power and 150 watts RMS allowing it to go the high, mid, and low end for an open sound stage.
• Exceptional  Sensitivity Rating: The speaker’s high sensitivity rating of 90dB will act as a great addition to any stock stereo.  With this rating, it not only outperforms its competitors in power handling but also it ensures that the unit does not crank under high volumes. In addition, the 4 ohm impedance rating makes up for the undersized wires found in most cars.

What we liked

• It includes mounting hardware, grilles, and wires.
• It reproduces non-fatiguing sound at a reasonable price.
• Attractive speakers that are a perfect replacement for your existing audio system.
• Built to withstand heavy-duty playtime.
• Easy to install and replace.

What we didn’t like

• Build quality is not up to standard.
• Low-end performance is not adequate.
• There is minimal distortion, but adding a subwoofer can help solve the problem.

Our Verdict: If you’re looking for the best features for an all-inclusive entertainment, PL573BL has you covered. It offers you high-quality sound for the price.

6. BOSS Audio CH5730

BOSS Audio CH5730 has been engineered to bring the rock in your life. It will enhance your music taste such that you will find yourself listening to music more and more. It will fit in any car, whether it has space or not and also you can install it in any location. Also, it features high-grade components such as aluminum voice coil that helps to increase the durability of the entire speaker.

BOSS Audio CH5730 Features and Benefits

• Butyl Rubber Surround: BOSS Audio CH5730 is housed in a butyl rubber surround that offers protection to the inner components. Rubber can endure exposure to harsh weather conditions, which is why it is used as a surround in many speakers. It compliments the entire speaker structure while allowing you to push the speaker to the limit without wear and tear.
• High-temperature Voice Coil: These speakers are capable of working efficiently even during heavy-duty play time thanks to the high-temperature voice coil.   It can work under high temperatures while still maintaining its strength and fatigue properties. The coil is made of aluminum, a material that will assure you a strong and durable product which does not get damaged over time.
• High-resistant Piezoelectric Tweeters: Piezoelectric tweeters have many advantages over other types of tweeters due to their electrical properties. These properties make them more resistant to overloads that would otherwise destroy the high-frequency drivers. Also, a piezoelectric tweeter can be used without a crossover and the good thing is you don’t need to install these tweeters separately.
• Polished Sound: These speakers take advantage of a gorgeous poly injection red cone to offer a great sound that will enhance your listening experience. The cone is made of polyurethane, a resilient and durable material that gives you a flexible unit that performs optimally regardless of your likings. The red color adds to the excellent look, making a statement in any car.

What we liked

• Inexpensive; the cheapest in our list.
• The best in terms of mid-range control.
• Perfect mounting depth.
• Compatible size.
• High-quality sound and highly durable.

What we didn’t like

• It is not just a plug and play speaker; requires special installation hardware.
• The rubber basket is not as durable.
• Narrow frequency response.

Verdict: CH5730 is a great entry level speaker with an unbeatable price point. It has decent power output, which means that you can get a lot from this speaker, making it a great upgrade from your stock system.

Our Review and Selection Process

When choosing the best 5×7 speakers for car audio replacement, there are several things that you need to keep in mind before ultimately making a purchase. Here’s is vital information and common terminologies to help you pick the best one;

Type of Speaker

Speakers majorly divided into two major categories, the full range speaker and the component speaker system.  The former utilizes the woofer for lows and tweeter for highs. Some more advanced version may have some additional drivers like the midrange.

This option is ideal when you want a high performing speaker with minimum fuss. Full range speakers are more available, easy to install, and are less expensive.

The component speaker system, on the other hand, has advanced features such as external crossovers along with woofers and tweeters. This type of speaker will yield more realistic sound with great depth. The component speaker is a good option if you want to customize your audio system. They are however, more expensive.

Power Handling

Power handling is a rating given by the manufacturer which rates how much power a speaker can operate at. It is normally given in two measurements, Peak power, and RMS power. When comparing this, the RMS power is the most important rating as it indicates the amount of power that a speaker can handle continuously. Peak power, on the other hand, is the max power that a speaker can handle in short bursts.

Knowing Sensitivity

Speaker’s sensitivity is the measure of the amount of sound which the speaker can produce from the power being applied. High sensitivity rating is an indication of how efficient the speaker is with the power it’s given. This means that you will need a high sensitivity rating for low powered systems, while the opposite is true for high powered systems.

The Frequency Range

This is the measure of how low or high the speaker can emit sound. Usually, the rating is given from the lowest to the highest frequency. A wider frequency range implies that the speaker can create more sounds. However, speakers with very high frequency tend to be inaudible.

Speaker Design and Materials

It is important to consider the material used to design the speaker as it has a great impact on sound quality and speaker’s longevity. For example, the woofer should be made with lightweight and stiff material such as polypropylene. This will determine the responsiveness of the speaker.

The woofer surround should also be made with durable and lightweight material that can endure heat and humidity. A rubber surrounding will typically last longer and will also yield good sound. Some inexpensive speakers may have foam or cloth surroundings.

When it comes to the tweeter, it should be made with hard materials such as metal graphite for better output. Soft materials such as silk or textile will make your speaker provide you with a warm sound.

Our Final Verdict

5×7 speakers have continued to gain popularity in recent years, possibly because they offer more sound and fit readily in many vehicles. They provide pure vocals, sound clarity along with great mid-bass.

We picked Rockford Fosgate P1572 Punch as the overall best 5×7 speaker because it has superb features and it gives a satisfying sound performance to its users. It is also available in a budget-friendly price, very durable, and it can stand up to hours of intense playtime.

Finding a budget car audio amplifier that delivers excellent performance has been a big challenge for many car audio enthusiasts. Audiopipe has a solution to this challenge. The company is famous for offering budget solutions for the car audio equipment market.

Audiopipe APMI-2000 is one of Audiopipe’s best offers. It is a one-channel amp that targets to meet the needs of a customer who is looking for a lot of power at a pocket-friendly price. This monoamp is exceptionally big on power. Do you have some 12-inch or 15-inch bass monsters and want a matching amplifier? Audiopipe APMI-2000 might be the perfect match.

Let’s explore what Audiopipe packed in this monoamp.

Features of Audiopipe APMI-2000

i. Great performance with one Ohm load stability

There are not many amps out there that can deliver 2000 watts RMS power. When you come across one that does, you are bound to have some questions like:

Is the amplifier reliable?

Is it ohm stable?

Does the amplifier overheat?

The RMS power ratings for the APMI-2000 are 900 Watts at 4 Ohms, 1400 Watts at 2 Ohms, and 2000 Watts at 1 Ohm. With this kind of power, the amplifier comfortably runs 15-inch subs pretty hard.

The APMI-2000 is also great for smaller subs. Some users tend to think that the amp could be too powerful for particular subs. However, you can never have too much power for a subwoofer. Remember, it is better to overpower rather than to underpower your speakers. Also, using an amplifier at far less than its capacity is good. Your system runs cleaner and crisper to provide better sound.

ii. High-efficiency design with MOSFET technology

Audiopipe designed this amplifier with MOSFET technology for pulse width modulated (PWM) power supply. PWM is the backbone of class D audio amplifiers. It is a switching power supply that allows you to increase the voltages so that you can increase the maximum audio output. Voltage regulation is necessary and useful when the charging system’s supply voltage or the demand for current on the power supply is not constant.

MOSFET technology makes the power supply ultra-high energy-efficient during sound reproduction. With minimal current wastage and less heat production, the amplifier runs cool even when pushed to the highest levels of power performance.

iii. Sound quality

Pair the APMI-2000 with a good quality sub and it will cause serious air displacement. The amp offers a friendly frequency response ranging from 8 Hz to 180 kHz. Although the frequency range is a bit shallow on the upper end, it is still well-fitting for the needs and desires of passionate audiophiles.

Audiopipe has done an excellent job in reducing disturbances in sound output when you add this amp to your system. The signal-to-noise ratio of this amp is higher than 70dB, and the Total Harmonic Distribution is 5Hz – 50Hz.

iv. Controls for power performance enhancement and sound customization

Audiopipe APMI-2000 allows you to increase the signal power efficiency to enhance the quality of sound output. A built-in crossover comes in the form of a 40Hz-180Hz low-pass filter and a 5Hz-50Hz subsonic filter. These filters enable you to tweak and twist audio to suit your listening tastes.

Besides, you can bridge the APMI-2000 easily to get extra power. It is as simple as switching on bridging mode to obtain the full-rated power in a single channel. Bridging increases the speaker’s volume. It is appropriate when you feel that the amplifier is not loud enough when operating in stereo mode.

Besides filters and bridging capability, this amp also has a remote bass level control that makes it easy to adjust the bass from any car seat.

v. Superior breakdown and damage prevention with 4-way protection circuitry

The majority of amplifiers of old had one common problem. They could break down frequently because their transistors would spontaneously combust. Today, things are different. Every amplifier manufacturer ensures that there is some level of current or thermal protection.

Audiopipe APMI-2000 is among the modern-day amplifiers with excellent current and thermal protection. The amp uses a 4-way circuitry, which includes low voltage, short circuit, overload, and thermal protection. The protection circuitry continuously monitors the voltage and thermal conditions of your system, aiming to avoid any damage that can result from overheating or current upsurge. Thus, amplifier failure is a rare occurrence when you have this Audiopipe masterpiece.

Turn up the music to the max and let your subs kick hard with no worries about your amp breaking down. The massive heat sinks on each side of the amp provide further protection against overheating. They offer efficient cooling by conducting heat away quickly during regular operation.

vi. Compact size and aesthetically pleasing exterior

Audiopipe APMI-2000 features a mini-design that is pretty decent and pleasing to look at. The amp’s 416.5mm by 165mm by 56mm dimensions make it very low-profile so that it easily fits in the boot or under the car seat.

Pros

• Massive power output
• One-ohm stability
• Amp delivers clean and clear sound
• Compact size that fits in small spaces
• Superior protection circuitry enhances the durability of the amp
• Comes at a very affordable price

Cons

• Bass boost control is sometimes not accurate
• Prone to overheating if not tuned properly
• Installation can be challenging for a technically unskilled user

Final say on Audiopipe APMI-2000

Audiopipe APMI-2000 is a perfect choice if you want to take your in-car entertainment to the next level in the most pocket-friendly way. Your subs might be the best on the market, but they cannot give out their best without a powerful amplifier. The APMI-2000 is the missing link to more thumping bass and louder sound. It will allow your subs to perform at their max so that you can enjoy blasting your favorite jams as you drive.

Audiopipe has made this amplifier innovatively to avoid making any significant compromises on power delivery and audio signal amplification. That’s why many users who need more power on a budget love it. While the amplifier has a few limitations compared to more expensive competing brands, its core performance is uncompromised. Thus, the APMI-2000 monoamp offers great value for your money. Most users prefer installing it in the boot as it does not take much space there.